Canon Digital Rebel EOS 450D EOS Rebel XSi Digital Camera - Answered Questions & Fixed issues
CANON REBEL XS
It can happen if you are in the Auto-No Flash mode. Or if the flash release button is stuck.
Contact customer service, and have a pro take a look at your camera.
9/25/2018 6:56:24 PM •
Canon Rebel...
•
Answered
on Sep 25, 2018
•
400 views
Trying to download pics from computer and get error 31, but then camera automatically disconnects itself
Try NOT connecting your camera to your computer.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo management program such as Picasa.
Organize edit and share your photos
11/15/2014 8:23:09 PM •
Canon Rebel...
•
Answered
on Nov 15, 2014
•
46 views
Focus lights are Dim on My 1100d
Remove black side cover (two screws) and rear cover and check the rear circuit board for a missing screw in the lower right corner. Find screw and replace. If it did not short out the circuit you should see the function return. Other, send to Canon for circuit replacement
5/14/2014 1:16:13 AM •
Canon Rebel...
•
Answered
on May 14, 2014
•
53 views
Liquid soap inside the screen
The soap is probably between the back light and the LCD itself, on one of the plastic Fresnel screens. You may be able to clean it off with Windex on a Q-tip. Remove back cover (can't give directions without knowing which model)
5/23/2014 4:04:40 PM •
Canon Rebel...
•
Answered
on May 23, 2014
•
49 views
No picture on card
What model Canon camera? What type and size memory card do you have in it?
11/23/2013 2:29:09 AM •
Canon Rebel...
•
Answered
on Nov 23, 2013
•
34 views
My canon rebel XS will only recognize or even
Try formatting the cards on your PC. Alternatively I would suggest that you reset your Firmware or if it is not on the latest version upgrade while you are at it - this should reset anything that potentially could have been scewed.
8/30/2013 10:13:16 AM •
Canon Rebel...
•
Answered
on Aug 30, 2013
•
56 views
Linkage problem,
Make sure lens is set on AF and not M. Clean body and lens contacts with a Q-tip dipped in alcohol. Try multiple lenses to make sure it is not a problem with just one lens. Put the lens on M and turn the front and make sure it turns freely and is not stuck by impact/spillage etc. Push down on the release button and make sure you have two distinct 'pops' (release switch may be broken). Gently lift up mirror and make sure that the AF sub mirror also comes up properly. Impact can break the little plastic guide pin for the sub mirror so that it is not in the right position and the AF will not work. Also make sure that the spring that makes the sub mirror come up is in position (they come off). Can be on either the right or left side of the mirror depending upon the model.These are the steps I would take if you brought your camera into the shop I work at.
5/5/2013 4:59:44 AM •
Canon Rebel...
•
Answered
on May 05, 2013
•
113 views
Not finding what you are looking for?