20 Most Recent
Zenith R50W46 50" Rear Projection Television - Page 2 Questions & Answers
Image is burned into the screen...
Hi,
Unfortunately the image can't be removed because it literally is burned into the picture tubes. You'd have to replace them which isn't cheap.
Zenith projection tv model number r50w46
I read in the manual that you can turn the speakers off using the menu command when you connect up an external stereo system. You might want to check if this menu command inadvertantly was set to off. good luck
Zenith R50W46
you have bad convergance ic that need to be replaced.
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm
No sound
very simple
1 check spekar &its connection for loose contact
2 sound section supply.
3 parts near ic might be defective near sound section.
Model R50W46
Try to use the manual search on the remote. If you do not find the code that way, then you are stuck using two remotes as if the set is compadable with that remote, it will be pre preogrammed into the remote as you do not program the remote. You only retrive codes that are already in the remote.
My zenith CD/DVD duplicator LCD light on but no ready
If the LCD light on your Zenith CD/DVD duplicator is on but it is not showing as "ready," it is possible that there is an issue with the duplicator's internal components or settings. Here are a few troubleshooting steps you can take to try and resolve the issue:
Check the disc trays: Make sure that all of the disc trays are closed properly and that there are no discs stuck inside the duplicator. If a tray is open or a disc is stuck, the duplicator will not be able to operate properly.
Check the power source: Make sure that the duplicator is plugged into a working power source and that the power cable is securely connected to the duplicator. If the power source is not providing enough power, the duplicator may not be able to operate.
Check the settings: Check the duplicator's settings to ensure that it is set up correctly for the type of disc you are trying to duplicate. For example, if you are trying to duplicate a DVD, make sure that the duplicator is set to duplicate DVDs and not CDs.
Reset the duplicator: Try resetting the duplicator by unplugging it from the power source for a few minutes, then plugging it back in and turning it on. This can sometimes resolve minor issues with the duplicator's internal components.
If none of these steps resolve the issue, it is possible that there is a more serious issue with the duplicator's hardware or software. In this case, it may be best to contact Zenith customer support or a professional technician for further assistance.
Not finding what you are looking for?