20 Most Recent
Zenith C27A24T 27" TV - Page 5 Questions & Answers
Volume adjustment for tv
sound like volume bottom stuck. replace that volume up & down bottom. if not still not function it. you need to replace same # epprom. good luck!
How can i swich my tv to AV?
Most TV have remots if your does not because you lost it you can get one from radio shack or
www.remotes.com, but more often then not you can try you up channel key until the inputs show up, also more often then not there is a menu button on the front of the tv and you can select the input from there.
but if all else fails a rmeote will work.
thanks and leave your wonderful feedback before you leave. Btw, I’m available to help over the phone in case u need at
https://www.6ya.com/expert/edwy_1a56970cf1ea4620
Need the code for the remote to controll a zenith
Try one of these, 001,004,089,099,105,177,197,200,017,092,016. ..hope this helps..
27 inch Zenith TV Vertical too big
If you are using a DTV coverter box, you may have changed the aspect ratio with your remote control. look for a button marked "aspect" or "picture size" use that to change size.
If you have a cable box, you may have a similar button.
Or you may find a picture size adjustment on your TV remote.
If you do not have "aspect" button on your remote try going to set up menu and look for picture size.
Older TVs used to have a vertical size adjustment at the back. look in the manual.
If none of the above, you have a biiger problem with the TV internal parts needing attention
I have a 26inch Console Zenith Color TV, when I
Hi,
Get the remote control and press the MENU key repeatedly until you see the Video menu at the bottom of the list of options you will see EZ Picture.
Use the up/down arrow keys to select EZ Picture and use the left/right arrow keys to select your preference. Set the preference to Preset not custom.
Press Enter, Quit or Menu to exit. See if resetting the TV's Picture settings resolves the problem.
If you have a bar at the top of the screen as well then it could be in letterbox viewing mode. Again just go into the Video menu and turn it off.
Please let me know how you get on.
Good luck.
I have a universal philips remote control without
Some times universal remote controls have an option to find codes automatically.
if not try these 3 digit codes one at a time.
002 008 115 215 405 407 601 701 713 903 916
1. Press and hold the Code Search button until the red
indicator stays on. Release the Code Search button.
2. Press and release the desired mode button (TV,
DVD, etc.).
The red indicator blinks, then stays lit.
3. Enter the 3 digit code from the code tables. Note:
after a valid code entry, the red indicator turns off.
For an invalid code, the red indicator flashes.
Hai,my zai computer model-ZI449. iam install the
Hi
It sounds like a driver problem. Click > Start > Settings / Control Panel > System, Then in System properties, click the Hardware tab, clcik Device Manager and look down towards the bottom, for Sound, video and game controllers, if there is a yellow ! next to that it means it has issues with that driver and you need to reinstall it. might woby just clicking reinstall driver, or rollback driver, if not, you will need the disc that came with the PC, or download a sound driver for you motherboard.
In that case, you need to have a look on the mo' boardfor the make and model then try somewhere like www.driverguide.com, and search their database for sound drivers your mo' board, its free once you register with them.
Hope thats helps a bit!
How do you open the menu to do an auto channel
These hotel t.v use a particular remote so that customers can`t fool around with the setup,You may be able to get an eeprom i.c for a similar chassis from a local repair shop, but then your set may need some adjustment through the service menu i.e vertical and horizontal size, a local tv repairman may be able to help you there. good luck
I do not find a vedio/audio(red, yellow,
There are 5 RCA connectors on the back of this TV, (according to the manual). The lower three from left to right are Video in, Audio Left in, Audio Right in. There are also two RCA connectors above these that are the L/R audio outputs. Also, there is an S-Video input which I would recommend using instead of the RCA Video in. You'll still need to use the RCA inputs, but the S-Video will give you the best video connection into this monitor.
My old zenith (probably early 90s) only gets up to
[1] use LG exteanel setup box chenal convater 90 to 200 ch avalabel in market .
[2] use inside of tv extra chenal convater pcb. PHLIPS.
[3] change complet new tv chasis with new latest function and all new facilety
EXP.
UOC Technologey chasis
NTSC /PAL /SCAME / AUTO Multi Colour System
Auto Search tunig
A/v 1 -2 -3 Stereo.
A.v Out facility
DVD Comonent input
surround sound mode
1300w pmpo woofer System
on timer /off timer /clock /sleep timer facilety
calender
5 pictur mode
Curtain Effect.
all facilety Avalabel in TOSIBA /SANYO chesis
pls Cont. your Nr.tv techicien
Not finding what you are looking for?