20 Most Recent
Frigidaire FRT18S6J Top Freezer Refrigerator - Page 2 Questions & Answers
I have a frigidaire refrigerator and can't figure out where one wire connector goes
Yes, very often they make one wiring harness to cover a number of models in the series, which means you have redundant wires. If everything works, don't worry.
One trick is that permanently connected wires sort of set in place and naturally reach out towards where they were connected. also, a wire will only fit things within reach within an arc.
How do i install an ice maker on a frigidaire
Good Morning Friend,
I understand you want to know how to install an ice maker on your Frigidaire refrigerator. Typically, this is not a do it yourself job, as there are no step by step instruction manuals. I suggest contacting your local authorized technician for further assistance. They have been trained on your appliance and should be able to install the ice maker with ease. Hope this is helpful.
-Best Regards-
WP
Frigidaire gallery ice maker
Check your filter. When filters get old they can restrict the water enough to cause issues. The cubes start to get smaller and from time to time the ice maker will freeze up.
How to change frigidaire phsc239dsb5 refrigerator change from celsius to fahrenheit
The steps to change the temperature display from Celsius to Fahrenheit on a Frigidaire PHSC239DSB5 refrigerator may vary depending on the specific model, but generally, it can be done through the control panel. Here are some steps you can follow:
- Locate the temperature display on the control panel of the refrigerator.
- Press and hold the "Option" button until the display starts flashing.
- Use the "Option" button to toggle through the display options until you reach the temperature display setting.
- Use the "+" or "-" button to switch from Celsius to Fahrenheit.
- Once you've made the desired change, press the "Option" button again to save and exit.
Note: The specific instructions may vary depending on the model, so you may want to consult the user manual or the manufacturer's website for more detailed instructions.
Electrolux ac heat/cool window unit blows cold air on heat.
There are a few possible reasons why an Electrolux window AC unit may be blowing cold air when set to heat mode. Here are a few things you can try to fix the problem:
- Check the thermostat settings: Make sure that the thermostat is set to "heat" mode and that the temperature is set higher than the current room temperature.
- Clean the air filter: A dirty air filter can restrict airflow and prevent the unit from heating properly. Clean or replace the filter according to the manufacturer's instructions.
- Check the air ducts: Make sure that all of the air ducts are properly connected and that there are no leaks or blockages.
- Check the compressor: If the compressor is not running, the unit will not heat. Make sure that the compressor is running and that the compressor's fan is functioning properly.
- Inspect the heating element: Make sure that the heating element is not broken or damaged and check the continuity with a multimeter.
- Contact the manufacturer or a professional technician if the problem persists or you are unable to troubleshoot the issue.
Note: Before you start troubleshooting, make sure to turn off the power to the unit and unplug it from the electrical outlet.
Frigidaire Gallery Side by Side French door fridge not making ice.
If your Frigidaire Gallery side-by-side French door refrigerator model FGHF2366PFBA is not making ice after you switched the water filter, there are a few things you can check to troubleshoot the issue:
- Check the water pressure: Make sure that the water supply to the refrigerator is turned on and that the water pressure is adequate.
- Check the water filter: Make sure that the new water filter is installed correctly and that it is not clogged.
- Check the water inlet valve: Make sure that the water inlet valve is not clogged or malfunctioning. It is located behind the refrigerator and controls the flow of water into the ice maker.
- Check the ice maker arm: Make sure that the ice maker arm is not stuck in the off position.
- Check the thermostat: Make sure that the thermostat is set to the correct temperature.
- Check the control board: Make sure that the control board is not malfunctioning.
If the problem persists after checking these things, it may be best to contact a professional technician to diagnose and fix the issue.
Frigidaire frs26zgg ice maker is not working
It sounds like there may be an issue with the water inlet valve or the wiring between the ice maker and the water inlet valve. Here are a few things you can try to troubleshoot the issue:
- Check the water supply line: Make sure that the water supply line is properly connected and there are no kinks or blockages in the line.
- Check the water inlet valve: Make sure that the water inlet valve is functioning properly and is not clogged or damaged. You can test the valve by jumping the two terminals with a small piece of wire. If the valve opens, it is functioning properly.
- Check the wiring: Make sure that the wiring between the ice maker and the water inlet valve is securely connected and there are no loose or damaged wires.
- Check the ice maker control board: The control board is responsible for controlling the ice maker and may be the cause of the issue if it is faulty. You can test the control board by unplugging the fridge and using a multimeter to check for continuity between the control board terminals.
If none of these troubleshooting steps resolve the issue, it may be necessary to consult the manufacturer or a professional appliance repair technician for further assistance.
Code d1 sp
Had this problem and called customer service and they had no idea. Turns out it's an alert that the suspense is jammed (DISP). Clear it out with your hand and you should be good to go. I figured this out after my kitchen was full of puddles when I got home from work.
Not finding what you are looking for?