Top 20
Roland CUBE Street Amp Combo Questions & Answers
My roland cube street starts making this really weird loud noise
Hi, Quick Check. Very often the input socket which is soldered directly to the circuit board, will have a broken solder joint. This is common on a very large amount of equipment. Try waggling the plug about and seeing if the noise comes and goes.
Easy fix, re-solder joint. Permanent fix, connect socket to board with flying leads, or fix socket to board with hot glue or epoxy resin.
All the best, Chris the Fader.
Roland cube street water damage repair
What part of it got wet will determine the course of action.If the whole unit were submerged, the unit may prove more time consuming to try to fix than to locate a used one. However, I have salvaged imersed laptops before. the procedure is not much different- make sure the unit is as dry as you can possibly make by blowing a fan on it for an extended period of time.- Days.Once dried, use some contact cleaner on the jack contacts and interupts, any manual control and any switch. You can then apply power. If nothing lights up, check and replace fuses as needed. Also check the power supply board for failed caps or rectifiers. Once the power supply is known to be functional, systematically check the LCD display and the aspects of the amp that it controls. This board will be the most vulnerable and most likely to be the source of most issues you will encountr. If the display survived intact, and amp does nto work, apply a signal to the inputs and trace the signal through the amp with a set of headphones set up with test prods. The problem will be where the signal stops.
Hi. Can I use the second pedal on my Roland BK5 to scale up the key one semitone at a time?
Yes, you can use the second pedal on a Roland BK-5 keyboard to transpose the key of the music that you are playing up or down by a semitone at a time. To do this, you will need to press and hold the second pedal while playing the keyboard. You can also use the transpose function in the settings menu of the BK-5 to adjust the key of the music that you are playing by a specific number of semitones.
12/30/2022 4:35:31 PM •
Roland Music
•
49 views • 1 helpful votes
I need a circuit diagram for a Roland MA-15D speaker please?
It's a Chinese made Roland and no service information is available as when a fault is found the main board is replaced, eliminating the need for service information.
I would check that it is a stereo out jack and not mono. If it is a stereo out, check that both input phonos work. If they do, replace the faulty socket or damaged pcboard.
11/17/2022 4:11:40 PM •
Roland Music
•
70 views • 0 helpful votes
Roland A-90 no sound with sliders on full
i moved you from computers
to music + roland.
it needs service, find a shop to fix it;
IT RAN FOR 1995 TO NOW, 26YEARS
FRANKLY AN AMAZING RUN. FOR SURE.
it needs service, you have 2 choices besides upgrade.
1: shop fix it.
2: buy the service manual and learn electronics.
check DC power rails inside first and fuses .
12/25/2021 11:51:33 AM •
Roland Music
•
84 views • 0 helpful votes
Not finding what you are looking for?