20 Most Recent
JVC AV-32D305 32" TV - Page 8 Questions & Answers
Color is messed up
Solved. I tried the 2nd Bell receiver and Color is fine now.
Took the "questionable" receiver to 2nd TV. Satellite was awaiting connection message, then it said it was downloading a software update to the receiver. After the download completed, the color was fine.
Nothing to do with the JVC TV, it was related to a software update from Bell Expressvu to the 2700 card/receiver.
JVC av-32fa44
Sounds like one of the front panel buttons is jammed. press each one and see if any fail to "rebound" or feel different from the rest. You can usually work the button in a 'circular motion" to release it. If the buttons seem normal , it's possible that the switch inside the TV has collapsed
My RCA F31672ET is messed up, what can it be?
These unit are notorious for bad solder joints in the tuner unit. If you unplug the tv and remove the large PC board, flip ot over and you will see a large silver oblong with 3 solder points. de-solder theses and removed the cover from the tuner. Re-solder the connections along each of the sides of the oblong shaped case.and you will also see some ground pins which also need re-soldering.
put the cover back on and you should be good to go.
As always, exercise caution , Televisions can hold a charge on some of the capacitors for quite a time and can shock you even after it has been unplugged for a few mins
My tv was dropped and now the color is messed up how can i fix it
Unfortunately, this can't be fixed without replacing the picture tube. The drop caused a piece called the shadow mask inside the tube to warp or break loose. When that happens, the red, green and blue beams in the tube don't hit the right places on the screen. There isn't any way to repair this kind of damage.
If you had professional movers doing the job, their insurance should cover some or all of the cost of repairing the TV (replacing the tube, that is) or replacing the set. I wish I could give you better news.
Initial set up
I have the same problem with my jvc av2648s. I used a universal remote from dishnetwork to program my tv. If you don't have one of these remotes, email me at
[email protected] and I will send you one free.
Convergence
Replace Both of your STKs convergence ICs big black ICs STK392-110s use number on your STKs for replacement www.electronix,com 1=800-223-3205 for Parts if they are 110s use 180s if 020s use 040s
How do i get out of lock on my tv
This set has a front panel MENU button which is good, since most universal remotes don't seem to work the TV menu.
Use the menu button to get to the closed-caption setup and make sure it is turned off. The black square is because the captioning is set for text mode. That part of the screen is being blacked out so the text (which isn't there) can be displayed.
Not finding what you are looking for?