20 Most Recent
JVC AM FM CD DET FACE CAR STEREO - Page 2 Questions & Answers
Car Radio won't turn on
Did you verify it has 12 volts on it's main power wire? Make sure the ground connection is good?
CD won't eject
What model is it?
A problem with most JVC mechanism's are that they become mis aligned and therefore hold your discs inside.
FixMyRadio .net
JVC won't eject my CD!
Turn radio off
Push and hold the eject button
Turn radio on while holding the eject button.
This is the force eject sequence
Jvc kd- r311 lights up
Check your speakers and speaker wires to make sure there are no shorts or grounds. If the speakers and speaker wires check out, you probably have a bad internal output ic.
How to remove car stereo from 1996 buick riviera
If you have a JVC in your car now, you will need the extraction keys that were given with the radio. (thin sheet metal keys) that allow radio to be removed. They can be purchased by calling JVC once you know model or reach out to installer who might have them available.
I need unlocking code of radio cd hm-5064
Instructions
-
- 1Remove the faceplate around your stereo. Slip a flat object under the edge and gently pry it up. A flat-head screwdriver works well. There will be clips holding the faceplate in place, so feel for them. You may need to move your faceplate up or down to slide it out of position.
- 2
Find and remove any screws holding the stereo in place.
- 3
Slide the stereo component out far enough to see the label on top of the stereo. Write down the model and serial numbers of your car stereo component.
- 4
Locate your VIN number at the base of the front window, driver side. If you can't read your VIN off the window, you will have it on your proof of insurance and title as well. Write it down.
- 5
Locate your car manufacturer's toll-free Customer Service number and call them. Click on the link in the Resource section of this article and find your car manufacturer's toll-free number.
- 6
Call the number and let customer service know you need your stereo code and have the vehicle's VIN number, as well as the model and serial numbers off the stereo. They will provide you with the code. If you are unsure how to input the code, be sure to ask for support at this time.
I bought a jvc kd-s27
when i go to connect my power supply nothing happens the jvc will not turn on, but when i connect my old pioneer it works, what is going on?
2004 sunfire
The best advice for a quick solution is for you to look at your fuse box. It should indicate right there what fuse is for the radio. If not, look at all of the fuses and replace the one that is blown.
Not finding what you are looking for?