Top 20 Canon imageRunner C3100 Copier - Page 8 Questions & Answers

Error code E000110 in a Canon image RUNNER ADVANCE 1730i multifunction printer typically indicates a problem with the paper feed system. This error can be caused by a number of different issues, including a jammed or misaligned paper tray, a problem with the paper feed roller, or a problem with the paper feed sensor. Here are a few steps you can take to try and resolve the issue:

• Make sure that the paper tray is loaded correctly and that the paper is loaded according to the manufacturer's instructions.
• Clean the paper feed rollers with a lint-free cloth and check for any debris or foreign objects that may be causing the jam.
• Check the paper feed sensor for any damage or debris, and clean it as necessary.
• If the issue persists, try to reset the machine. If the problem is caused by a misconfigured settings you can try to restore factory settings to see if the problem resolves.
• If the problem persists and you have recently replaced the laser unit, check to make sure that the unit is properly installed and that all of the connections are secure.
• Check the printer manual or contact Canon support, as they may have more specific instructions or troubleshooting steps that can help identify the cause of the issue.

It's also possible that the problem is not related to the laser unit but instead, it can be caused by a malfunction in other parts of the machine. For example, it could be caused by a malfunctioning paper feed motor, a sensor malfunction, or a malfunctioning control board.

If the inner finisher on your Canon IR-2535 doesn't return to the home position at times and there are no error codes displayed, there are a few potential causes and troubleshooting steps you can try:

1. Check for any obstructions: The inner finisher may be blocked by a paper jam, debris or foreign objects. Check the finisher carefully and remove any obstructions.
2. Check the finisher sensors: The finisher has sensors that detect the position of the finishing unit. If these sensors are dirty or blocked, they may not function correctly. Try cleaning the sensors with a dry cloth.
3. Check the finisher motor: The inner finisher is powered by a motor that moves it into position. If the motor is not working correctly, it may cause the finisher to malfunction. You can try checking the motor and replacing it if necessary.
4. Check the finisher control board: The finisher also has a control board that may malfunction and cause the finisher to stop working correctly. If none of the other troubleshooting steps work, you can try replacing the control board.

It is important to note that opening and working on the inner finisher can be dangerous, so if you are not experienced in working on office equipment, it may be best to call a professional for assistance.

The error message "error occurred 5B00" on a Canon MX320 printer typically indicates a problem with the waste ink absorber. The waste ink absorber is a component in the printer that absorbs excess ink that is expelled during cleaning and other maintenance operations. When the waste ink absorber becomes full, it can cause this error to occur. Here are a few things you can try to troubleshoot the problem:

1. Reset the printer: You can reset the printer by unplugging it from the power source, waiting a few minutes, and then plugging it back in.
2. Service mode: You can enter the service mode by pressing the "Menu" button, then "Copying", then "Functions", then "Maintenance" and then "OK". Once in service mode, you can try to reset the waste ink counter.
3. Clean the print head: Clean the print head to ensure that the printer is properly aligned and functioning correctly.
4. Replace the waste ink absorber: If the waste ink absorber is full, it will need to be replaced.

El c?digo de error E261-0000 en la impresora Canon imageRUNNER 2204L se produce cuando se detecta un error en la se?al cero-cruz de la fuente de alimentaci?n durante la inicializaci?n. La soluci?n a este problema es reemplazar el PCB de la fuente de alimentaci?n y el PCB del controlador DC. Tambi?n es importante verificar el termistor principal TH1 para asegurarse de que tenga un buen contacto y que no est? abierto. Si todav?a no se resuelve el problema, podr?a ser necesario reemplazar el interruptor t?rmico.

Parece que el problema podr?a estar relacionado con el t?ner. Compruebe si el cartucho de t?ner est? lleno. Si no es as?, reempl?celo con un cartucho de t?ner nuevo. Adem?s, es posible que desee ajustar la configuraci?n de densidad de t?ner en el controlador de impresora a una configuraci?n m?s oscura. Para obtener m?s informaci?n, consulte el manual del usuario o p?ngase en contacto con el fabricante.

https://www.google.com/search?q=CANON+IMAGERUNNER+ADVANCE+2030+error+code+E000196-1BFF ..

Error E355-0005 on a Canon imageRUNNER ADVANCE 2026N is related to the printer's hard disk drive (HDD) and can be caused by several issues.

1. Perform a hard reset: Turn off the printer and unplug it from the power source. Wait for a few minutes before plugging it back in and turning it on.
2. Run a HDD check: Go to the service mode and run a HDD check from the device status menu. The printer will scan and check for any errors on the HDD, and if it finds any, it will try to repair them.
3. Format the HDD: If a HDD check does not resolve the issue, you can try formatting the HDD. This will erase all data on the HDD, so make sure to backup any important data before proceeding.
4. Replace the HDD: If the above steps do not resolve the issue, the HDD may be faulty and will need to be replaced. This should be done by a professional technician.
5. Check the firmware: Ensure that you have the latest firmware version installed, outdated firmware can cause issues with the printer's performance.

Error code 744-3030 on a Canon IR 4570 indicates a problem with the toner hopper. Here are some steps you can take to try to resolve the issue:

1. Turn off the printer: Turn off the printer and unplug it from the power source. Wait for a few minutes and then plug it back in and turn it on.
2. Check the toner: Open the toner hopper and check to make sure there is toner inside. If the toner is low, refill it.
3. Check the toner hopper motor: The toner hopper motor may be malfunctioning, causing the error code. Check the motor to see if it is working properly. If it is not, it may need to be replaced.
4. Check the toner hopper sensor: The toner hopper sensor may be dirty or malfunctioning, causing the error code. Clean the sensor and make sure it is working properly. If it is not, it may need to be replaced.
5. Reset the printer: Reset the printer to clear any error codes. To do this, turn off the printer, press and hold the "1" and "9" buttons, and turn the printer back on. Release the buttons when the display shows "Initializing."

If the above steps do not resolve the issue, it may be necessary to contact a professional technician or Canon support for further assistance. They can help diagnose and fix the problem safely and effectively

404 error = question has been deleted [ problem has existed with question or was spammed ]

Once you get the warnings you will normally get lots more prints before it actually runs out. Printer Properties will tell you the Ink levels. I used to use exclusively Can original cartridges, but fed up of paying the exorbitant prices, I bought two full sets of cartridges off amazon, 14 cartridges in total for $32. They are working great.

If your Canon IR2520 is jamming in the exit tray after initializing the machine, it could be caused by a few different issues:

• Paper tray: Make sure that the paper tray is loaded correctly and that the paper is not jammed or loaded incorrectly. Also, check if the paper tray is not overfilled or if the paper is not wrinkled.
• Pick-up roller: The pick-up roller is responsible for picking up paper from the tray and feed it to the printer. Check if it is dirty or worn out.
• Exit guide: The exit guide is responsible for directing the paper out of the machine. Make sure that it is not blocked or bent, which could cause the paper to jam.
• Fuser: The fuser unit could be malfunctioning. The fuser is responsible for heating and fusing the toner to the paper. If it is not working properly, it could cause paper jams.
• Feed rollers: The feed rollers are responsible for feeding the paper through the printer. Check if they are dirty or worn out.
• Paper jam sensor: The paper jam sensor may be malfunctioning. If the sensor is not working correctly, it may not detect a jam and the printer will continue to try to feed paper through.
• It is recommended to check the copier's manual or consult with the manufacturer's technical support to troubleshoot the problem. They may provide more specific instructions for your specific model and can guide you through the process of finding and fixing the problem.

These are general suggestions and your specific case may require different actions. Regenerate response

If your Canon printing calculator is not advancing paper, there are a few potential causes for this problem:

• The calculator may be out of ink or ribbon. Check the ink or ribbon and replace it if necessary.
• The calculator's print head may be dirty or clogged. Clean the print head to remove any debris that may be blocking the paper from advancing.
• The calculator's paper feed mechanism may be damaged or stuck. Check the paper feed mechanism and make sure it is functioning properly and not stuck.
• The calculator's gears or other internal components may be worn or damaged. If the problem persists, you may need to have the calculator serviced by a qualified technician.

If you are unsure how to check for and address these potential causes, you may want to consult the user manual for your Canon printing calculator or contact the manufacturer for assistance.

If you are experiencing issues with your Canon IR3300 printer when trying to print in Xerox print processing mode, but it's working fine in regular print mode, there could be a few possible causes. Here are a few things you can check:

1. Check the printer driver: Make sure that the correct printer driver is installed and that it is compatible with the Xerox print processing software. If the driver is not compatible, the printer may not function properly in Xerox print processing mode.
2. Check the network connection: Make sure that the printer is properly connected to the network and that it can communicate with the Xerox print processing software.
3. Check the print settings: Make sure that the print settings are correctly configured for Xerox print processing mode. This includes the resolution, color mode, paper size, etc.
4. Check the Xerox software: Make sure that the Xerox software is compatible with your computer's operating system and that it is properly installed and configured.
5. Check the firmware: check if your printer's firmware is up to date.
6. Check the paper size and tray: Make sure that the paper size and tray are correctly configured for Xerox print processing mode.

Did you mean LS-82Z? Your model doesn't exist. It is the most basic of hand held calculators, and there is no adjustment for the number of decimal places. You need a desktop printing calculator for that. single sheet manual

LS-82Z (USA)_EZ2-4607 - Amazon S3

https://s3-ap-southeast-2.amazonaws.com > Canon 8 ... PDF Canon. LS-82Z. Calculator. OPERATION. DISPLAY. GENERAL INFORMATION. 1. One alkaline battery (Type: LR1130). 2. Automatic power off function (approx. ..

Change the primary charge roller

or most Canon printers, including the Canon Pixma TR 8620, the scanner cover does not need to be closed for the printer to function properly. However, to use the scanner or copy functions, the scanner cover must be closed. It is possible that the scanner cover is not locked in place properly, or that there is an obstruction preventing the cover from closing. You can try the following steps to fix the issue:

1. Make sure the scanner cover is properly aligned and locked in place.
2. Make sure there is no debris or foreign objects inside the scanner bed or on the scanner cover.
3. Make sure the printer is turned on and that the scanner is properly connected to your computer or device.
4. Check the printer's manual or the support page on Canon's website to see if there is any troubleshooting or instructions specific to your printer model.

If the problem persists, it may be a mechanical issue with the scanner cover or the printer itself, and it may require service from a qualified technician.

Need more info. Trying to print wirelessly? I have found not setting a static ip on printer causes problems after router reset.

To remove and clean the printhead on your Canon IP1300 printer, follow these steps:

1. Turn off the printer and unplug it from the power outlet.
2. Open the printer cover and raise the printhead lock lever.
3. Lift the printhead out of the printer.
4. Moisten a cotton swab with warm water and gently clean the printhead nozzles. Be sure not to touch the gold-colored electrical contacts.
5. If the printhead nozzles are heavily clogged, you may need to soak the printhead in a solution of warm water and a mild cleaning agent for a few hours. Be sure to follow the manufacturer's instructions for the cleaning solution.
6. After cleaning the printhead, shake it gently to remove any excess water, and then let it dry for a few hours.
7. Once the printhead is dry, replace it in the printer and lower the printhead lock lever.
8. Close the printer cover and plug the printer back in.
9. Turn the printer on and perform a printhead alignment to ensure that the printhead is properly aligned.

If you are unable to clean the printhead or if the problem persists after cleaning, it may be necessary to replace the printhead. A new printhead can be purchased from the manufacturer or an authorized dealer.

If the scanner cover on your Canon Pixma printer is stuck, there are a few things you can try to fix it.

1. Check for any debris or foreign objects that may be preventing the cover from opening. If you find any, carefully remove them.
2. Try gently pushing or pulling the cover to see if it will move. Do not use excessive force as this can cause damage to the printer.
3. Check the user manual for any troubleshooting steps or specific instructions for opening the scanner cover.
4. If none of the above steps work, you may need to contact Canon customer support for further assistance or take the printer to a professional repair technician.

Please make sure to turn off the printer and unplug it before attempting any troubleshooting steps.