Canon imageRunner C3100 Copier - Answered Questions & Fixed issues
Canon IR C3100n copier "NG 853" error
I had a similar problem with my MF6540. I could access the remote UI and see that the printer was recieving information via the print log. It would list all of my test pages that I tried to print but in the print results column I would get an error code NG(##5536) and the printer would not actually print anything. I tried the UFRII driver stated above and everything seems to be working now.
11/12/2021 6:47:30 PM •
Canon...
•
Answered
on Nov 12, 2021
•
75,179 views
Canon IR C3100N Scanner Setup
Hi
Its fair simple, if you are scanning to windows PC, Create a folder called scans in your C:\ drive. Share it and give all the permissions. Thereafter log on to your copier using the IP address in your internet explorer. Go to address, click address book one, click the second tab on your left saying register new address. thereafter enter you name, then change from FTP to SMB and then host name will be your computer name\ip address, followed by scans(\\computername\scans)just like that. followed by your username and password.
Thanks
7/3/2015 4:02:25 AM •
Canon...
•
Answered
on Jul 03, 2015
•
2,203 views
Reset pasword canon IR C2550
Clear Admin Password Get Full AccessYou need to get access to service mode settings which a printer technician should know then follow below instructions>COPIER>FUNCTION>CLEAR>PWD-CLR Headlight PWD-CLR and hit OK
10/30/2013 12:08:19 AM •
Canon...
•
Answered
on Oct 30, 2013
•
574 views
Canon ir C3100 Admin Password
Hello skunkel,
Yes, I believe I can help you. Hopefully these previous admin person did not go nuts with the security thing. But I can help you either way. The least painful method. Approach the copier and view the operator control panel as we are going to go into service mode and delete the admin password. I am about to describe a "fluid 3 step keystroke " function which will put you into service mode. Before we start , locate the "ADDITIONAL FUNCTIONS" button located between the LCD screen and the 9 key pad. Now, press additional functions, then the numbers 2 and 8 simultaneously, then back to additional functions in a smooth three step flow. The screen will change as you have entered service mode. Depending on the configuration of the device you will have several tabs in your display and copier will be at the top. Press copier. A new display appears with several tabs across the top. Press the function tab. New display again, and now press "clear". New display again. Look for "PWD-CLR". Once found, press it. It will be highlited,and then press the "OK" button in the lower right corner. The ok button will indicate you have touched it by beeping or highlighting or both (depends on the model). Then turn the main power off (the actual switch not the button on the op panel. If you are in doubt unplug the machine. After a few seconds re-energize the copier. If the previous administrator merely used a password then it is now deleted and you are home free. If not, then you will need to enter service mode again.......copier........function.......clear..... and then find MMI . Clearing this field will delete ALL customer inputs(IP address, favorites etc). If it is necessary press MMI and then ok. Usually you wont have to do this. But if you do you can have the fun of re-entering all your old settings as it will go back to factory settings.
3/28/2013 8:05:14 AM •
Canon...
•
Answered
on Mar 28, 2013
•
15,266 views
Error E000732-0001
Reader communication error
Check on connection between the reader controller
PCB and the main controller PCB, Check on the
reader power supply
This error can occure during transfer of machine, the boards are conected with one slot.Try to adjust and reconnect boards.
2/24/2013 12:51:43 PM •
Canon...
•
Answered
on Feb 24, 2013
•
1,503 views
Canon Ir C3100 Error 000070-0002
A E000070-0002 deals with the transfer belt. I believe it deals with the two tension arms, one may be broken...... It is not easy to get the unit out of the copier.... Good Luck
6/27/2011 1:09:58 AM •
Canon...
•
Answered
on Jun 27, 2011
•
608 views
Printer is warming up error
did'nt got ur error. try to remove the boot rom and reinstall it .and do the same with the hdd ,it may solve the prob.if not try to write more about it
6/5/2011 4:23:14 PM •
Canon...
•
Answered
on Jun 05, 2011
•
112 views
When i get my c3100
Waste toner bottle full, open front door, one screw, make sure small cut out in the neck of the bottle is clean afterwards.
6/4/2011 1:07:19 PM •
Canon...
•
Answered
on Jun 04, 2011
•
596 views
Let me know how can
U can connect through a network or even as standalone printer through usb port.In network connect the machine to the network through rj 45 cable and then load the driver in the server and access it from there .
Through usb simply run the driver when it asks to connect the machine connect the usb lead and rest it will take care of.
5/23/2011 8:24:56 AM •
Canon...
•
Answered
on May 23, 2011
•
154 views
E000012-0002
Hello, sounds like a fault with the drum or fixing unit. Also try cleaning the drum sensor.Remove the drum and locate the sensor along the white plastic bar.Clean with a cotton rag so that you dont create static electricity.Failing that, try changing the drum. And if all that fails contact your local Canon service centre. I hope I have helped.
3/29/2011 5:13:35 AM •
Canon...
•
Answered
on Mar 29, 2011
•
262 views
E000020-0081
check the hopper motor ,hopper connector and developer connector .
1/11/2011 10:55:29 AM •
Canon...
•
Answered
on Jan 11, 2011
•
179 views
I want softwere of ir2020
Click here to visit Official drivers and support for Canon IR-2020
Select the Operating System you have on your PC, select language and click 'submit' to download
the required drivers
Let me know if any further clarification/ assistance is required.
Good Luck!
Appreciate generously, if the solution could have been of any help!
CreativeTECH
12/20/2010 10:31:33 AM •
Canon...
•
Answered
on Dec 20, 2010
•
92 views
Not finding what you are looking for?