20 Most Recent
Canon imageRUNNER C3200 Copier - Page 3 Questions & Answers
Where does laser drive motor in canon ir2270
Laser polygon mirror motor is in the laser assembly. Take off front and left cover on copier and remove laser gently out of left side.
Laser scanner motor is behind the reader rear cover.
6/17/2014 5:42:05 PM •
Canon...
•
Answered
on Jun 17, 2014
How can i flash the drive
DOES IT HAVE A USB PORT THAT YOU CAN CONNECT A LAPTOP TO? If so download the appropriate software from their site and update using the laptop.
6/13/2014 1:41:55 PM •
Canon...
•
Answered
on Jun 13, 2014
Not come in ready stage
Check in service mode, * 2 & 8 *, under Copier > display > Dens. Look at the value for each individual color. The normal value would be between zero and one. If you have a color with a value around four or five you have an issue with the toner/starter concentration level for that color. By replacing that color drum unit you will temporarily resolve the issue due to the Developer Assembly being incorporated with the drum unit, which has the correct toner/starter concentration. To resolve this issue replace the Toner Cartridge Drive Assembly, FG6-8999-000, and the corresponding drum unit at the same time.
5/18/2014 4:02:48 PM •
Canon...
•
Answered
on May 18, 2014
How to fix error code e000020-1360
Possible Solution:The Black toner feed motor was wired incorrectly causing the motor to operate in reverse. Toner would be augered away from the opening instead of toward it. The part number for the toner cartridge drive assembly is FG6-8999-000.* The assembly is more cost effective than the motor.
5/18/2014 3:58:19 PM •
Canon...
•
Answered
on May 18, 2014
I have error code E000732-0001 on Canon imagepress C1
Error :
E732 code
Workaround :
E732 code is a Reader communication error.
If the Reader is disconnected from the Printer a E732 code will result. Once the Reader is disconnected the logic on the MAIN-Controller is changed to a "0". The copier is now set up to be a Printer only, and will not recognize the Reader.
To correct this, you must enter service mode, COPIER>OPTION>BODY>W/SCNR and set that to "1". Then you must turn the copier off, then on.
To enter service mode: press "Additional Functions" then "2" and "8" together, then "Additional Functions".
Which User Guide? Reference, Easy Operation Guide, Printing Guide, Mailbox Guide, Sending Guide etc....
4/11/2014 3:10:12 PM •
Canon...
•
Answered
on Apr 11, 2014
Not finding what you are looking for?