20 Most Recent
Hitachi 57S700 57" Rear Projection HDTV - Page 4 Questions & Answers
Why won't my 40 inch Hitachi tv not power on
Try resetting the power by switching off the TV and then switch off the TV's power outlet and disconnect the TV's power cable from the outlet. Press and hold the TV's Power button for about 30 seconds to drain any residual power from the TV and then release the button. Turn on the TV in the normal manner and see if it turns on then afterwards.
2/3/2021 8:21:00 AM •
Hitachi...
•
Answered
on Feb 03, 2021
How do i scan for channels on my hitachi RC A48105. I do not have a manual
I don't know but it probably isn't much different to most other tv/remote combinations where commands are given by the remote and carried out by the brain in the tv.
Start by pressing the Menu button and the main menu should appear onscreen and from there use the up, down, left and right buttons to navigate the main menu and the select button to select sub-menus and items from the menu(s) until you reach the section on channel search, installation, etc.
9/27/2020 10:18:23 AM •
Hitachi...
•
Answered
on Sep 27, 2020
Hitachi rear proj tv Channel Manager says " This Function is not available". How do I do a channel rescan?
First make sure that the current Source or Input is set to TV. This is usually the only reason for the error message you see. To select the source, look for a Source or Input button on the original remote. If you have an universal remote with a button with the Source/Input label, you may need to try alternative codes to make the button work. (Power and channel controls will often match across multiple codes for the TV manufacturer.) Alternatively, check if there is a Source/Input button on the TV or a section of the menu system with the function. Once you set this source, try again.
Note: there was a period when manufacturers sold some TVs without tuners. They were labeled HD-ready sets. These can't do a channel scan and do not have an RF antenna jack on the set.
I hope this helps. Please add a comment with the model number of your Hitachi TV for more information on setting the source on your set.
Cindy Wells
5/22/2020 7:45:47 PM •
Hitachi...
•
Answered
on May 22, 2020
I need to know how to hook my DVD player to ,y
look on the back of the television and the DVD player, there should be a SCART socket and/or red, white and yellow AV sockets, either use a SCART lead and connect it to the SCART on the DVD player and the TV.Or use an AV lead with 3 auxiliary shape connectors and match the colour of each connector with the female sockets on both the TV and the DVD player instead of using the other component connections.
5/7/2020 8:40:16 AM •
Hitachi...
•
Answered
on May 07, 2020
Not finding what you are looking for?