20 Most Recent Hitachi 57S700 57" Rear Projection HDTV - Page 7 Questions & Answers

If you wish to get some details; visit the sites linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ http://homenol.blogspot.com/

Hi
I need code for Elekta Lcd bravo..
Please help me soon

https://helpforum.sky.com/t5/Sky/Sky-HD-remote-code-for-a-Hitachi-43hb26t72u/td-p/2899528 should work

http://www.fixya.com/tags/hdtv_antenna/browse/hitachi https://manualsbrain.com/en/manuals/993851/

check this forum out.https://www.justanswer.com/tv-repair/2l9s1-hitachi-55-inch-projection-tv-won-t-turn-makes.html

That is a good a guess as any.

http://www.hitachi-america.us/products/consumer/tv/

Hello this seems like main board issue with this TV and that a repair might be possible but may not be cheap. Sites: National Organization Of Installation and Service Engineers Noiseuk or https://www.tvparts.co.uk/index.php?route=account/login

Hello this could be software depends on model and serial number of this to be able to obtain it but is 50/50 chance on this being hardware instead. I can advise on obtaining this from 0345 604 0105 if purchased at Argos. If hardware then please use local repair if none found here are two https://www.tvparts.co.uk/index.php?route=account/login or National Organization Of Installation and Service Engineers Noiseuk

According to the specifications, https://www.cnet.com/products/hitachi-l32a403/specs/ , the Hitachi L32A403 has a digital (ATSC) and an analog (NTSC) tuner. Check if the input/source is set to TV. The signal strength information will only be available if you are using the digital tuner. This TV has an Input button on the TV and on the original remote. (It's the second from the bottom on the side of the TV, between the power and menu buttons. On the remote, the Input button is above and to the right of the arrow/Select keys. The Menu button is on the left side of the remote in that same line.) Press the Input button and then use the arrow keys to highlight the desired input; press Select to go to the input. On the TV the Channel Up/Down buttons are the same as the Up/Down arrows on the remote in this menu. The Volume keys will work as Left/Right. Make sure to set the Channel Source to Air before attempting to scan for channels and check the signal strength. The Channel sub-menu is at the bottom of the list on the On-Screen Menu, after you press that button. However, this menu is not available if the input isn't TV. See the manual here: https://www.searspartsdirect.com/partsdirect/user-manuals/l32a403-hitachi-parts-manual . Since digital signals are either enough to be seen by the tuner or give no signal, make sure that you use the best antenna appropriate for the distance and frequencies being broadcast in your area. Point the antenna in the correct direction. See http://www.antennaweb.org or http://www.tvfool.com for information on the stations near you. Antennaweb gives a very conservative list even though it assumes an external antenna. I hope this helps. Cindy Wells

Consult user manual.

Your guess would be as good as any.

Universal remotes need to be coded in to whatever appliance you are wanting it to operate. Check the instructions on what codes to use for your Hitachi. Otherwise look on Ebay. There are hundreds of remotes at reasonable prices or check with Hitachi parts for a genuine remote.

Have you got an led light on TV? if you do try another socket and control switches on the TV. If no led light then try another wall socket and fuse in plug. Hitachi LE55S606 Owner Manual