20 Most Recent GoVideo DVR4000 DVD Player/VCR Questions & Answers

If the DVD drive is a recorder, yes. If it is a player only, no. If the tape is copy-protected, recording to a DVD recorder is not possible. Assuming the tapes are not copy-protected, and you are using a DVD recorder with the correct format DVDs (DVD-R for example), you shouldn't have any problems transferring old VHS tapes to DVD.

Yes, Different sections can go bad. Meanwhile the issue is with the tape player on vcr. Bet you that the rubber belt(s) that drive the transport have stretched and ............................

There seems to be problem with the ejecting mechanism of your device. It is not properly closing. Try opening the device and clean the ejecting mechanism and load tray. If the problem persists, get repaired at the authorized service center.

Visit this site for more details. Type in the site name "Electro-help" either to Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as Service help to electronic home entertainment equipments.

Pull up older posts. You can get all details.

Site is listed with Google. You can locate it either at the bottom part of first search page, or at the top of second page.

Sometimes, one among the advertisements by the side and bottom of each post might help you to get details about the availability of spare parts and other components.

The disc loading mechanism has the fault. It might need replacement.

Visit this site for more details. Type in the site name "Electro-help" either to Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as Service help to electronic home entertainment equipments.

Pull up older posts. You can get all details.

Site is listed with Google. You can locate it either at the bottom part of first search page, or at the top of second page.

Sometimes, one among the advertisements by the side and bottom of each post might help you to get details about the availability of spare parts and other components.

Unplug the dvr from the electrical outlet.Wait for about 15 minutes.Plug back in the dvr.

you can easy to find from partstore.com.

Hi,

You can download the complete instruction manual in PDF format by clicking this link.

On the page which opens, click on the "Download" button to download and save the manual.

• You'll require Adobe PDF Reader installed on your computer to view the manual. If it is not already installed on your computer, download it free from: http://get.adobe.com/reader/

Hope this solves your problem. Thanks for using FixY

your laser lens need to be clean/use a qtips and wood alcool /ject disk open cover keep door open
unplug dvd and you will see the lens just wiped whit the q tips ,gently and you done it should works fine
put the cover back and try it;if it wont work you may have to replaced the laser assembly its easy..
hope that will help you
regards ALAN

Check your connections for faults, also some connections on TV's are for RGB inputs, so you might have to try another connector or if you can switch the DVD's output to RGB etc.

hello,
i do not know if this can help, but you can try www.filehippo.com

goodluck

This unit is confused. The timing may be messed up. Try unplugging the unit for 1/2 hour. This will force a system reset and make the unit go through a complete startup check/reset. This may clear it up. If not, hopefully the symptoms will change slightly. Please post the results of the "reset".

Thanks,
Dan

manual can be found here

987456894569566 is divided by 0.56