Yamaha P95 Digital Piano - Answered Questions & Fixed issues


For the P95 user manual visit

https://uk.yamaha.com/en/support/manuals/index.html

However there is no P160 should this read PSR160 in which case select this at the same link.

Dan

Yamaha P95... | Answered on May 03, 2017 | 44 views


I have this problem too and it got worsened over time. Have you found a solution yet ?

Yamaha P95... | Answered on Feb 08, 2017 | 143 views


This is confusing... you say "the sustain works when you disconnect the cord"? How can that happen? and doesn't work when it is plugged in.

MOST sustain pedal problems are due to people using a different pedal than the keyboard is designed to use. It is very common that someone tries to use a Roland sustain pedal on a Yamaha and oof course it doesn't work because the Roland pedal is normally closed and Yamaha usually requires a normally open contact.

A FEW keyboards now check the state of the pedal input when power is first turned on and configure the pedal polarity accordingly. For these keyboards, make sure the pedal is plugged in before power is turned on.

Yamaha P95... | Answered on Nov 05, 2016 | 857 views


You are probably trying to set the new pitch on the wrong octave. Try using the C above middle C as the center point.

Yamaha P95... | Answered on Oct 27, 2015 | 1,240 views


Take a look at this page from the user manual.

25779392-n3efj5hfs1j0bw2r01yldgte-3-0.jpg

Yamaha P95... | Answered on Aug 14, 2015 | 98 views


Use the factory reset
Hold down highest white key whilst turning on
This should return to factory settings - pitch should now be back at A440
If you need to adjust then see page 19 of the user manual where it explains fine tuning.

Yamaha P95... | Answered on May 14, 2015 | 151 views


thats a motherbord problem./ ic called tone generator which is usually faulty.

Yamaha P95... | Answered on Oct 17, 2014 | 354 views


try to clean under neath of those particular keys very gently with cotton buds .2)is it the case with in all the octaves 3) has the K.B been in humid places

Yamaha P95... | Answered on Sep 30, 2014 | 325 views


Take it to a tech... What are you going to do to fix it, hit it with a big rock?

Yamaha P95... | Answered on Apr 17, 2014 | 2,612 views


Haha yes - I know the feeling...fingers are nowhere near the keyboard the "BANG!" a note or a cluster of notes happens out of nowhere! :)

Easiest solution will be to take it in to our local Yamaha Dealer and have them clean the contacts. Dust and hair can get between the keys and cause all sorts of problems with the sensors/contacts.

I have learnt to clean them myself using a photographic blower brush, and if you're daring, give it a go. If not - don't risk it :)

Yamaha P95... | Answered on Dec 25, 2013 | 224 views


Jesse, it sounds like the instrument has a defective power button.
If it still under warranty, contact the store where you purchased it. If the store is an authorized repair facility, they can take steps to fix it on their dime, or send it to Yamaha if needed.
If it's out of warranty you can replace it yourself if you're an experienced tech. If you're not, go into it knowing that you may damage all of the electronics. This will not be covered under the warranty.

Myself, I barely know an electron from a crayon. So if you're like me, find an audio repair tech, or a music store that works on electronics. Get a few hourly labour rates and an idea of their part prices. Then call around, get a few quotes- they may differ a bit.
Either way, you'll be able to turn it on, press the keys, make music. And that's the most important part.

Yamaha P95... | Answered on Jun 23, 2013 | 82 views


You have set the transpose to +1. You need to reset the transpose function to zero or no transpose.

Read here: http://faq.yamaha.com/us/en/article/musical-instruments/keyboards/digitalpianos/p_series/p-95_color_variation/4713/3479

Yamaha P95... | Answered on Dec 05, 2012 | 3,968 views


Have a professional tune it for you. It may be that some strings have loosened/tightened.

Yamaha P95... | Answered on Oct 05, 2013 | 316 views


All I can suggest is try a master reset. It could be a software bug or a dried out electrolytic capacitor in the power supply.

Yamaha P95... | Answered on May 06, 2011 | 838 views


This is bad and indicates a short between lines of the scanning matrix of the keys. Check if you also have trouble with F# and G. Thiss may be a connector that is displaced OR contamination such as a staple that has fallen into the works. Turn the unit upside down and slap your hand against it and see if it has same problem.

Yamaha P95... | Answered on May 03, 2011 | 191 views


Most keyboards have fuses, and this could be the problem. If there is access to a fuse on the back panel, check to see if it is still good. If there is no fuse cap, then the internal power supply may have a blown fuse. If so, it's time to see a service tech...

Yamaha P95... | Answered on Mar 03, 2011 | 425 views


You need to dry the water off before it corrodes any electrical connections, disconnect the power. Put the keyboard somewhere warm or it would be best to dismantle it and dry the water with a cloth.

Yamaha P95... | Answered on Feb 23, 2011 | 511 views


how come mine is ok, maybe it's depends on where you bought it.

<a href="http://bestdigitalpianoreview.com/yamaha-p-85-review">Yamaha P85 Review</a>

Yamaha P95... | Answered on Feb 12, 2011 | 889 views

Not finding what you are looking for?
Yamaha P95 Digital Piano Logo

53 questions posted

Ask a Question

Usually answered in minutes!

Top Yamaha Music Experts

Michial Gueffroy

Level 3 Expert

1140 Answers

Mike

Level 3 Expert

4363 Answers

Brad Brown

Level 3 Expert

18121 Answers

Are you a Yamaha Music Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...