Sharp AR-M205 is refusing to copy - machine gun clicking noise
at lower right corner near where fuser drive gear and motor gear
train are. Fuser was replaced with new fuser and noise still
persists. Service tech removed and replaced gear train with a
new one. Now we have a click-click noise. Any ideas on
a solution since both fuser and gear train and now new.
Thanks
Colin
Sometimes the clicking noise can come for the developer cartridge or the drum. you can carefully take them out and see if they turn freely.
Posted on Aug 12, 2008
When the machine is turned on this error code F1-15 comes up on the display. The given description is "sorter problems, call for service." Any ideas? I've researched this code and found that it may be a stacker motor issue. I was just wondering if anyone has had any experience with this code and possible solutions. Thanks
Hello sir; this error code means " elevator motor "problem inside the finisher,check it out is something stuck the motor. or you have to replace one.
Posted on Feb 16, 2009
sharp ar-m205 shows error code E7 11 when scanning
U HAVE TO UPGRADE THE FIRM WARE BY ENTERING SIMULATION 49-1 THE VALUE IS d THEN UPDATE THE FIRM WARE IF U HAVE IT
Posted on Jun 06, 2009
how can I fix?
Try reset the code by pressing [#] [Interupt] [C] [Interuptr] [14] [COPY/START]
If error still exist, check the thermofuse and the heater lamp
Posted on Jun 23, 2009
I am getting an error code L6 on my Sharp Copier AR-M205. What does this mean?
Hello sir; "L6" display it means laser motor defect need to replace.
Posted on Aug 19, 2009
Sharp AR-M205 - Error Code L6
L6 10 Content Polygon motor lock detected Detail It was judged that there is no output of polygon motor lock signal of LSU. The lock signal was checked at about 10-second intervals after the polygon motor started rotating. As result, it was judged that the polygon motor failed to operate normally. Cause Disconnected connecter to LSU or detached harness inside LSU or broken wire. Polygon motor defective Check and remedy Check polygon motor operation with SIM61-1. Check harness and connector for connection. Replace LSU if needed
Posted on Jan 14, 2010
How do I reset the Sharp AR-M205 Copier please?
On the key pad P * C * sim 14
pound star clear star sim 14
Posted on Aug 24, 2010
ARM205 Error Code CH. what is wrong with our Sharp Copier
If CH flashing reinstall your toner cartridge properly if not that mean you have an open door close it.
Posted on Dec 29, 2010
SHARP AR-M205, WILL NOT PRINT WITH WINDOWS 7, BUT IT DOES PRINT WITH XP, HOW DO I GET TO PRINT IN WINDOWS 7
i have window wista my sharp copier AR-M205 software is not suported in operating system please solve my problem.
Posted on May 28, 2011
sharp AR-M236 Copier Driver for Window 7
Here is a link to the driver download page. Under DRIVERS AND SOFTWARE, choose "photocopiers", then scroll down to the model number and select. Then pick either Windows 7 or Windows 7 64-bit as desired. If it won't open a window, right click on the option and choose "open in new tab".
http://support.sharp.net.au/drivers
Posted on Nov 22, 2015
409 questions posted
Usually answered in minutes!
1,105 Questions
603 Questions
557 Questions
354 Questions
183 Questions