20 Most Recent
Sharp LC42SB48UT 42 in. LCD TV - Page 9 Questions & Answers
How to disable the FPA for sharp LC-40LE830U?
FPA stands for Front Panel Lock, which disables the buttons on the TV's front panel. To disable it on the Sharp LC-40LE830U, follow these steps:
- Turn on the TV.
- Press and hold the VOL- button on the TV's front panel.
- While holding the VOL- button, press and hold the INPUT button on the remote control.
- Hold both buttons down until the message "Service Menu" appears on the screen.
- Release both buttons.
- Use the arrow keys on the remote to highlight "Option" and press ENTER.
- Highlight "FPA Lock" and press ENTER.
- Change the setting to "Off" and press ENTER.
- Press EXIT to exit the service menu.
The FPA lock should now be disabled, and you should be able to use the buttons on the TV's front panel again.
I am trying to troubleshoot a sharp aquos tv.
The 1 blink followed by 3 blinks error code on a Sharp Aquos TV usually indicates an issue with the mainboard or the power supply board. It's difficult to say whether replacing the power supply board will fix both the black screen and the blurry/discolored picture issues without further diagnosis.
Here are a few things you can try to troubleshoot the issue:
- Check all cable connections: Make sure all cables and connectors are securely attached and not damaged.
- Perform a hard reset: Unplug the TV from the power outlet and wait for 60 seconds before plugging it back in. This can sometimes reset the TV and resolve any issues.
- Check the mainboard: If the power supply board appears to be functioning properly, the issue may be with the mainboard. Inspect the mainboard for any physical damage or burnt components.
- Test the power supply board: If you have a multimeter, you can test the power supply board to see if it's supplying the correct voltage to the mainboard and other components.
- Contact a professional: If you're not comfortable troubleshooting the issue yourself, it's best to contact a professional repair service or the manufacturer's customer support for further assistance. They may be able to provide additional troubleshooting steps or recommend a service center for repairs.
It's important to note that taking off the back panel of a TV can be dangerous, and if you're not experienced with electronics repair, it's best to leave it to the professionals.
My sharp model LC-70EQIOU WONT RESPOND TO REMOTE COMMANDS THE POWER LIGHT FLASHES NO PICTURE, NO SOUND
If your Sharp TV is not responding to remote commands and the power light is flashing, here are some steps you can try:
- Check the batteries in the remote control and replace them if necessary.
- Try using a different remote control to see if the issue is with the remote or the TV.
- Unplug the TV from the power outlet and wait for a few minutes before plugging it back in. This may reset the TV and resolve the issue.
- Check the connections between the TV and any external devices, such as cable boxes or DVD players. Make sure the connections are secure and the cables are not damaged.
- Try using the buttons on the TV itself to see if the issue is with the remote control.
If these steps do not resolve the issue, it is possible that there is a hardware problem with the TV that may require professional repair.
14v-w70m sharp tv flyback
I'm sorry, I'm not sure what your question is. Can you please provide more information or clarify your request?
Can I force HDMI on a sharp 50LE652E?
Yes, you can force the TV to display HDMI by accessing the input selection menu. Here's how to do it:
- Press the "Input" or "Source" button on your Sharp remote control. This should bring up the input selection menu on the screen.
- Use the arrow buttons on the remote to select "HDMI" as the input source.
- Press "OK" or "Enter" to confirm the selection.
- The TV should now display the HDMI input signal from your device.
If this doesn't work, you may need to check the HDMI cable and make sure it's connected properly. If the cable is damaged or faulty, it can cause issues with the HDMI signal.
Regarding the eeprom problem, it's not recommended to modify the TV's firmware or eeprom unless you're a qualified technician. If you suspect that the TV's firmware is causing the issue, you should contact Sharp customer support or a professional repair service for assistance.
Have a Sharp tv model # LC-40LE431U. It has no video singal from any sourse inputs.Your help is needed, Thank You.
It sounds like your Sharp TV model LC-40LE431U may have a hardware malfunction. Before you start troubleshooting, try unplugging the TV from power for at least five minutes and then plugging it back in. This could reset some of the internal circuitry, which could resolve the issue. If that doesn't work, then you'll need to check all of the cables and connections to ensure that they are securely plugged in, as well as check for any signs of corrosion or damage. If everything looks good there, then it's possible that you may need to replace the main board or another internal component.
Sharp LC-50UE630X keep restarting at Android Logo
Hi there,
A little late in answering and you may have figured it out, you should have an option to select antenna or cable box. Select cable box and and make sure you have your source (laptop, Roku etc) plugged in. This should lllow you to use the TV as a monitor. It is what I do with my 65" Sharp Aquos.
Reset sharp 14v w150 m password
Resetting the password on a Sharp 14V-W150M projector can be a bit tricky, as the process may vary depending on the specific model and software version. Here are a few steps you can try to reset the password:
- Check the manual: The first step is to check the manual that came with the projector. It may have instructions on how to reset the password.
- Use the default password: Some Sharp projectors have a default password that can be used to reset the password. The default password is often "admin" or "password". If you're unable to find the default password in the manual, you can try searching the internet for it.
- Contact Sharp support: If you're unable to reset the password using the steps above, you may need to contact Sharp support for assistance. They may be able to provide you with a reset code or assist you with the process.
- Factory reset: If all else fails, you may need to perform a factory reset on the projector. This will erase all settings and restore the projector to its original factory settings, including the password. The factory reset process may vary depending on the projector model, so it's best to consult the manual or contact Sharp support for specific instructions.
It's important to note that a factory reset will erase all settings and restore the projector to its original factory settings, including the password, so it's best to have a backup of all important settings. It's also important to note that attempting to reset the password can be tricky and if you're not comfortable with this task, it's best to consult a professional technician or Sharp support for assistance.if i was able to help my cashapp $ralphpapi thank you have a blessing day
How to Reset sharp 14v w150 m password
Resetting the password on a Sharp 14V-W150M projector can be a bit tricky, as the process may vary depending on the specific model and software version. Here are a few steps you can try to reset the password:
- Check the manual: The first step is to check the manual that came with the projector. It may have instructions on how to reset the password.
- Use the default password: Some Sharp projectors have a default password that can be used to reset the password. The default password is often "admin" or "password". If you're unable to find the default password in the manual, you can try searching the internet for it.
- Contact Sharp support: If you're unable to reset the password using the steps above, you may need to contact Sharp support for assistance. They may be able to provide you with a reset code or assist you with the process.
- Factory reset: If all else fails, you may need to perform a factory reset on the projector. This will erase all settings and restore the projector to its original factory settings, including the password. The factory reset process may vary depending on the projector model, so it's best to consult the manual or contact Sharp support for specific instructions.
It's important to note that a factory reset will erase all settings and restore the projector to its original factory settings, including the password, so it's best to have a backup of all important settings. It's also important to note that attempting to reset the password can be tricky and if you're not comfortable with this task, it's best to consult a professional technician or Sharp support for assistance.
if i was able to help my cashapp $ralphpapi thank you have a blessing day
Not finding what you are looking for?