20 Most Recent GE Security Simon Xt Wireless Control Panel 40 Zones - Page 4 Questions & Answers

Hi, these are usually available in a service manual, these may be obtained from the 'net, or by a direct approach to the manufacturer.
Use the exact make and model and the words service manual when doing a Goggle search. or make direct contact to he manufacturer.

GE Home Security | Answered on Aug 29, 2011

You have to check the fuse inside the system . If there is any power surge happened then there is a chance for fuse become faulty. As you mentioned it would be a power side problem. first of check the fuse inside the system. Also you have to check the 16.5V transformer which provides the working voltage to the sysatem when it is line. If need any more assistance from me then you can contact me through fixya. One more thing is if can add any picture of the cotrol panel circut board then it will be very helpfull.

GE Home Security | Answered on Aug 13, 2011

Communication failure will clear itself once your phone lines are restored. Try arming your system and opening a door to set the alarm off, a forced signal will usually clear a communication failure. As far as parts, you can get them pretty cheaply from a local Alarm Company or dealer. Give them a call, most local, small dealers are fair and helpful. Easy to install yourself as well.

GE Home Security | Answered on Nov 23, 2010

Above is a link to the manufacturer, contact them and i am sure they will help. I have searched the net, but there is little info to be had?

GE Home Security | Answered on Aug 04, 2010


Regarding the phone line, see page 24-25 on document below.

Use RJ11 connector to connect the phone to Simon, then connect Simon to the landline.

This is the connection sheme:


To program the system you need to use the System Menu (see from page 40)

To enter the system menu, press either the scroll up/down or Enter buttons in the upper right of the panel. Press the STATUS button to exit a menu or option edit mode and navigate up one level. Pressing the STATUS button while in the top menu level exits the system menu level.

To enter system programming mode, do the following:
1. Press the scroll buttons until the panel displays System Programming.
2. Press Enter. The system prompts for an access code.
3. Enter the access code from the codes listed in Table 9. The system displays each entered access code digit as an asterisk.
4. Press Enter.
The panel is now in program mode.

For details on programming options see from page 42 (35 on page) in document here:Installation Manual

Here Key diagram.


Installation Manual

GE Home Security | Answered on Jun 30, 2010

locally if you have a battery plus store they carry alot of differnt batteries, or the alarm co. that installed it, or online you can find them, and worse case is locating the manufacturer is trying to get from them.

GE Home Security | Answered on Sep 25, 2009

Everything sounds ok. Try to add more port in your port forwarding. Actually, even if you don't forward port 80, by default its already open because that is for internet access. Research more port that your dvmre is using. You may want to isolate the problem by connecting your dvmre directly to the modem and check if it works there. If not, maybe your ISP is blocking some port the your dvmre is using.

GE Home Security | Answered on Mar 24, 2009

Concrete is a fabulous option for patios, sidewalks, and driveways. But, there can also be issues surrounding it. With the passage of time, holes and cracks may develop on the surface. Not to mention the devastating effects climate change or severe weather conditions can have. The good news is that you don't need to replace the whole surface! Cracks, chips, and holes can easily be fixed by a licensed professional. Even better: there are some things you can do, too, to protect your investments and avoid major concrete repairs. Check the attached link.

Home Security | Answered Yesterday

This is the right response to the question. Y= Video....Black= Ground...Green=12V Power....White = Audio....

Home Security | Answered 3 days ago

Yes, they do exist
www.stalwartproducts.com > safety-and-security

Safety & Security - Stalwart Tools

Stalwart ® Safety & Security products will give you peace of mind that your valuables are kept safe and secure, while still remaining easily accessible to you.

Home Security | Answered on Feb 12, 2020

Not finding what you are looking for?
GE Security Simon Xt Wireless Control Panel 40 Zones Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Top GE Home Security Experts


Level 2 Expert

80 Answers


Level 1 Expert

39 Answers

Are you a GE Home Security Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

GE Home Security

  • GE Home Security

Most Popular Question

seems beeping noise coming from

  • Home Security