20 Most Recent
Apple iPhone 3GS Black (16 GB) - Page 9 Questions & Answers
Iphone is diabled and cant login in
It seems that you've incorrectly entered the pass code too many times. The screen should tell you how long you have to wait to try again. If you don't recall your passcode then connect your phone to your computer, start iTunes, and choose "restore".
Iphone screen keeps zooming in
Go to (settings > general > Accessibility > Zoom) and click turn off zoom. Warning: getting around to just do this is a royal pain in the ***. Be patient.
Hi my Iphone 3gs won't slide to open and can't
Hi,
Press and hold Power and home button for few seconds, it will turn off the device, keep the device off for few minutes then press the power button only to make the phone on again, and it should work again properly, This may happens when you try to install apps specially themes which hangs the springboard
If you require more assistance, feel free to reply to this post
Regards-BA
I pressed reset & phone keeps rebooting help[!!!!!!
ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will Solved
Speed up iphone
If you're device is updated to IOS6 you may see some general performance problems because the os is designed to work with a much more powerful iPhone. If you can follow this guide that im linking you can downgrade to the older IOS 5.1.1 and the phone will be much faster.
My iphone 3gs is hanging
Hi,
Normally when resetting a jailbroken iPhone the phone freezes and will not startup. Unfortunately there is no other fix for this issue unless you install the latest software from Apple. 1. Connect the iPhone to your computer. 2. Open iTunes on your computer and click Restore.
This will download the latest software for your iPhone and install it
THANK YOU
How to change a sim card in an iphon 3gs
to remove the sim card this requires a very small tool or fine needle or fine piece of rigid wire and insert it into the ejection hole located near the sim card.Hope this helps
IPHONE ERROR 1015
Try holing the Home button and ON/OFF button at the top at the same time for 30 seconds. It should do a restart and everything "SHOULD" work I'm not 100% positive
My phone is not starting
You will probably need to reboot into recovery mode and restore your phone. To get into recovery mode, make sure your phone is connected to you computer with a usb cable, then you need to hold down the sleep button and the home button down at the same time for 10 seconds then release the sleep button. Continue holding the home button down until iTunes detects a phone in recovery mode, once it's in recovery mode you can press the restore from within iTunes.
Entire screen is magnified and huge. How can I
That's a simple fix.
Just double-tap on the screen of your iPhone using 3 fingers to zoom-out. You can do the same thing to zoom in.
For more iPhone / iPod touch tips like jailbreaking and unlocking, click here.If you need online help about jailbreaking and unlocking, you can contact me personally at this email: [email protected]...
Free unlock code for 3gs
ur defalt phones codes is 12345 or 00000 u can use it Default 4 Digit user code: 1234 or 0000Default 6 Digit Security code: 123456 or 000000Type *#06# at the mobile screen to know IMEI no of your mobile.send the IMEI no to me and i will reply you with unlocking code.IF Problem not Solved SoPlease New Software install in the Phone Problem will SolvedIf For puk & pin cod problem So PleaseVery Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office opratorEnter The Puk code and YesEnter The pin code and YesSo Puk code Open and Problem will Quickly Solved
My iphone shows only white screen when i try to
hi,
try this solution...
1. Put phone into Recovery mode (NOT DFU)
While the phone is off, hold down the Home button and immediatly plug it into your computer. Or else.
2. From a command prompt (Start>Run>"cmd"), change to the
directory where you extracted irecovery, and enter irecovery -s followed
by:
1. setenv boot-args 2
2. setenv auto-boot false
3. saveenv
4. /exit
Keep this window open for use later on!
3. Run greenpois0n - it will guide you to enter DFU mode, then it will stop on a white screen after you click "Jailbreak".
It should say "Jailbreak Complete!" and NOT "Jailbreak Failed!" next to the progressbar at the bottom.
4. Extract the iBSS from your custom PwnageTool image
(firmware.ispw/Firmware /dfu/iBSS.BoardID.RELEASE.dfu) into your
irecovery folder.
You can use WinRAR or another ZIP extractor to do this. IPSW files are really just ZIP files!
5. At a command prompt: irecovery -f iBSS
iBSS should be replaced with the name of the iBSS that you just
extracted from the pwnagetool image - ie iBSS.n88ap.RELEASE.dfu
6. At a command prompt: irecovery -s
1. setenv boot-args 0
2. saveenv
3. go image decrypt 0x41000000
4. go jump 0x41000040
5. /exit
At the "go jump" point your device should appear to reboot. Whether it goes back to a white screen or shows the Connect to iTunes screen depends on the firmware image used.
7. Restore your PwnageTool cooked or CFW firmware from iTunes.
Not finding what you are looking for?