20 Most Recent
Toshiba 36A50 36" TV - Page 4 Questions & Answers
Line across screen if i hite it it will work for a some time
If the line of which you speak is a horizontal line that looks like the picture collapsed, the problem is a vertical circuit problem. If hitting the set "fixes" it, then it is likely to be a bad solder connection. If you can solder, resolder the pins on the vertical IC. This is a small flat IC with about 11pins attached to a heat sink that may me marked LA7837 or something similar.
Let me know if that fails to resolve the problem.
Dan
A friend wants to sell us this tv for $75.
Looks like this television goes from $100-$200 on Craigslist. If your only looking for a cheap fix for a few years, I can assume you are in the right ballpark. It certainly wont have the movie style quality picture, but after all, it is better than paying $1,000.00 for an LCD. Remember, these televisions will most likely require the digital converter box come this Feb. if you want to watch regular channels w/o cable.
Tobshiba tv stays in one channel.
You might need to go into the menu options and set the input from cable to air or vice a verse. The tv in my kids room is like that if it's set to cable with no input at the cable jack then it only gets one channel even after you try to add channels.
36" 36a50 tv won't turn on
My 36A50 suddenly shuts off losing audio and video. The red light on the on/off switch continues flashing until the set is unplugged.
TV screen has a blue hue all over it
this problem can occur due to problem in different locations inside the tv.
...................................................
Please Don't Forget To Rate "FIXYA" Me For The Help
...................................................
36A50 Digital ready?
Hi duce1500,
Unfortunately, the 36A50 is not HDTV-ready. That means you will need a converter box. Here is a link to the model's specs, which includes this information:
http://www.amazon.com/Toshiba-36A50-36-TV/dp/tech-data/B00004YMBV/ref=de_a_smtdI should mention, however, that if it's connected to cable (or certain satellite services), you won't need a converter to watch the TV - you'll receive the digital signal (although you won't have the 1080-pixel HD resolution - the 36A50 only has 850 lines of resolution).
I hope this helps. Please let me know if I can be of any further assistance.
H2H
Time warner code for Fujitsu 42" tv
I have the 55 inch. try using 246. That works on mine. if not try 028,164,208,066
let me know if that works for ya
ric
another note, are you using the flash on the back of your cable box or do you have a sensor in front of the DVR box?
Picture only in middle of screen
Sounds like vertical problems on your circuit board. Unless you have some electronics experience you'd better take it in for repair.
The inside of a tube TV contains high voltages even when off and unplugged.
GL
The tv I have is not a projection it is a tube type
To be honest, I don't know in that case - I don't know a tremendous amount about the TVs. Best bet is to go through the TV section of the site and direct the question to one of the TV experts, and they can probably fix you right up.
Analog odr Digital?
the problem you are having is a loose solder connection on vertical ic,easy fix only soldering vertical ic.tools you need solder iron and solder. but yes your tv is analog and will require a digital converter.
Vertical size of picture
You have a number of bad capacitors in the vertical circuit. If you can solder, you should be able to repair this yourself. I'll look up your model to get the parts needed.
Dan
Toshiba pip
Try silver philips universal remote control ( 2 in one) $12 Dlls., get code search settings .........That's work !!!. I hope this work thank you
Universal remote codes
Do you have code search Mode?....( before Turn on your tv with button front)..... Press code search while red light come on, release and press tv, and press repeatedly power, when tv go off, press enter and ready!!. I hope this woork. THank you
Not finding what you are looking for?