20 Most Recent Frigidaire DGHF2360PF Gallery 22.6 Cu. Ft. French Door Counter-Depth Refrigerator - Page 2 Questions & Answers

Yes, very often they make one wiring harness to cover a number of models in the series, which means you have redundant wires. If everything works, don't worry. One trick is that permanently connected wires sort of set in place and naturally reach out towards where they were connected. also, a wire will only fit things within reach within an arc.

Good Morning Friend, I understand you want to know how to install an ice maker on your Frigidaire refrigerator. Typically, this is not a do it yourself job, as there are no step by step instruction manuals. I suggest contacting your local authorized technician for further assistance. They have been trained on your appliance and should be able to install the ice maker with ease. Hope this is helpful. -Best Regards- WP

Check your filter. When filters get old they can restrict the water enough to cause issues. The cubes start to get smaller and from time to time the ice maker will freeze up.

The steps to change the temperature display from Celsius to Fahrenheit on a Frigidaire PHSC239DSB5 refrigerator may vary depending on the specific model, but generally, it can be done through the control panel. Here are some steps you can follow:

1. Locate the temperature display on the control panel of the refrigerator.
2. Press and hold the "Option" button until the display starts flashing.
3. Use the "Option" button to toggle through the display options until you reach the temperature display setting.
4. Use the "+" or "-" button to switch from Celsius to Fahrenheit.
5. Once you've made the desired change, press the "Option" button again to save and exit.

Note: The specific instructions may vary depending on the model, so you may want to consult the user manual or the manufacturer's website for more detailed instructions.

bad valve on water dispenser

There are a few possible reasons why an Electrolux window AC unit may be blowing cold air when set to heat mode. Here are a few things you can try to fix the problem:

1. Check the thermostat settings: Make sure that the thermostat is set to "heat" mode and that the temperature is set higher than the current room temperature.
2. Clean the air filter: A dirty air filter can restrict airflow and prevent the unit from heating properly. Clean or replace the filter according to the manufacturer's instructions.
3. Check the air ducts: Make sure that all of the air ducts are properly connected and that there are no leaks or blockages.
4. Check the compressor: If the compressor is not running, the unit will not heat. Make sure that the compressor is running and that the compressor's fan is functioning properly.
5. Inspect the heating element: Make sure that the heating element is not broken or damaged and check the continuity with a multimeter.
6. Contact the manufacturer or a professional technician if the problem persists or you are unable to troubleshoot the issue.

Note: Before you start troubleshooting, make sure to turn off the power to the unit and unplug it from the electrical outlet.

If your Frigidaire Gallery side-by-side French door refrigerator model FGHF2366PFBA is not making ice after you switched the water filter, there are a few things you can check to troubleshoot the issue:

1. Check the water pressure: Make sure that the water supply to the refrigerator is turned on and that the water pressure is adequate.
2. Check the water filter: Make sure that the new water filter is installed correctly and that it is not clogged.
3. Check the water inlet valve: Make sure that the water inlet valve is not clogged or malfunctioning. It is located behind the refrigerator and controls the flow of water into the ice maker.
4. Check the ice maker arm: Make sure that the ice maker arm is not stuck in the off position.
5. Check the thermostat: Make sure that the thermostat is set to the correct temperature.
6. Check the control board: Make sure that the control board is not malfunctioning.

If the problem persists after checking these things, it may be best to contact a professional technician to diagnose and fix the issue.

Sorry about that useless reply from the new poster who seems to be guessing answers and probably thinks he gets paid for points. Everything on this site is voluntary. I checked and no one else has this problem that you have, which is unusual. My guess is that you have a fault with the door switch or more likely a bad connection on the display board. If can get to it, disconnect the connectors, spray them with electrical contact cleaner and reconnect. Another possibility is some type of feedback from the driver module on these new fangled LED Lights! https://www.google.com/search?q=Frigidaire+GRSC2352AF+panel+resets+when+freezer+door+opens ..

It sounds like there may be an issue with the water inlet valve or the wiring between the ice maker and the water inlet valve. Here are a few things you can try to troubleshoot the issue:

1. Check the water supply line: Make sure that the water supply line is properly connected and there are no kinks or blockages in the line.
2. Check the water inlet valve: Make sure that the water inlet valve is functioning properly and is not clogged or damaged. You can test the valve by jumping the two terminals with a small piece of wire. If the valve opens, it is functioning properly.
3. Check the wiring: Make sure that the wiring between the ice maker and the water inlet valve is securely connected and there are no loose or damaged wires.
4. Check the ice maker control board: The control board is responsible for controlling the ice maker and may be the cause of the issue if it is faulty. You can test the control board by unplugging the fridge and using a multimeter to check for continuity between the control board terminals.

If none of these troubleshooting steps resolve the issue, it may be necessary to consult the manufacturer or a professional appliance repair technician for further assistance.

The compressor or other electrical components have quit working. Or there has been ice that has accumulated over the coils. Or the wiring is faulty or the plugs could be loose. The cord could be frayed.You will need to have the while model to be either repaired or replaced.

If the door seal is that bad that it is letting all of the cold out. Put the duct tape on the left, right and bottom edges. Just enough pressure to seal.

This is caused by a blocked defrost drain. The defrost cycle is normally overnight and the condensate that is defrosted from the evaporator fins is supposed to drain into a pan near the compressor where it evaporates. Look on the external and internal rear of the unit for a pipe and a u-bend.

Try unplugging the unit for 5 full minutes, then plug back in and try resetting the filter light.

sounds like compressor not coming on

Had this problem and called customer service and they had no idea. Turns out it's an alert that the suspense is jammed (DISP). Clear it out with your hand and you should be good to go. I figured this out after my kitchen was full of puddles when I got home from work.

Run more water. The cloudiness is just air from the filter membranes. If you put the water in a glass it should clear in 5 to 10 minutes.

Refer to the installation manual. Google make model manual

Hi, please double check that it has enough water to make ice. If so, please power off and clean the machine before attempting to use ice maker again. Thank you.