20 Most Recent
Beko DSV64W White Vented Tumble Dryer 6 kg, 9 Cycles - Page 5 Questions & Answers
There are no dip switches in my remote for my ceiling fan
Impossible to answer without make and model.
Google
make model pairing remote to fan
Unless it is some obscure make, they all have DIP switches because some homes have multiple fans in one large area.
9/29/2023 2:13:08 PM •
Dryers
•
Answered
on Sep 29, 2023
Asko T731W 24 Inch Electric Dryer. How to replace belt on ask t731 dryer
Question edited for a lot more clarity and the correct name of maker in at least one place :>D
No one has done this job and documented it.
Normally you start at the back as the top has to come off. Then there are a couple of screws down at the kickboard, and you remove the front and the door. Be careful as there are wires to the door switch. With the top and front off, you can slip the belt onto the drum by putting the the belt between the drum and front rollers (or drum slides). Feed the belt past the idler pulley and onto the motor spindle. Remember the idler pulley puts tension on the back of the belt. It is a great opportunity to vacuum all the dust out. Turn the drum manually to line everything up. Put everything back together and do a test run..
https://www.google.com/search?q=asko+t731+dryer+replace+belt
..
8/19/2023 6:35:26 PM •
Dryers
•
Answered
on Aug 19, 2023
Apt type no imm 24 earth terminal connected to an oil boiler.
you posted to the category 'Laundry Dryers', but this doesn't seem like one. No idea what 'Apt type no imm 24' is supposed to be?
all question on Fixya need full 'make model (what it is)' as first three words and no abbreviations.
Google
make model installation
..
8/19/2023 6:32:59 AM •
Dryers
•
Answered
on Aug 19, 2023
Estate dryer won't start but has a humming noise
The Start/Run Capacitor has failed. The humming is the classic symptom. The capacitor gives is a jolt to get it running.https://www.whirlpoolparts.com/PartSearch/ProductBrandAllModels?brandId=123&productId=8..
8/12/2023 5:16:15 PM •
Dryers
•
Answered
on Aug 12, 2023
Kenm0re heavy duty washer SM9710805-A lint filter location
The model tag is around the doorframe. I don't believe that's the correct model number. They are typically located in the front behind the door, or on the top panel they'll be a rectangular flap. That flap will lift up, and you grab the handle of the line screen and pull it out. Make sure it's pushed back in fully, and don't do it while it's running.
8/3/2023 1:49:14 AM •
Dryers
•
Answered
on Aug 03, 2023
I have a Duracraft Tabletop Fan model DF 1800 3
I have the same question. I picked one up for free and it was manufactured in 1996. I pulled two measuring cups full of dust out of it with tweezers. I took four screws out and still couldn't separate it. I researched on YouTube and I think it CAN'T be taken apart for cleaning. I got a degreasing spray which someone recommended and took care to try to do each side separately so that nothing would get inside the motor. That cleaned it up quite a bit, but I ultimately took the hose to it (carefully) to get most of the dirt/dust out, avoiding the motor while doing it. I am letting it air dry in the sun and then will see if it actually powers up after all this work cleaning it. It was too much of a fire hazard with all the caked on dust inside to try powering it up before cleaning it. If you found the manual, let me know as I need it as well.
8/2/2023 7:42:11 PM •
Dryers
•
Answered
on Aug 02, 2023
Not finding what you are looking for?