20 Most Recent LG 32LN530B 32" 720p LED-LCD TV - 16:9 - HDTV - Page 8 Questions & Answers

Updating the firmware and ensuring power to the TV, and make sure that the cables are plugged in correctly. Unplugging the TV and everything that is attached to the TV for about a few minutes to see if that makes a difference.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Circuit diagrams of power boards to many popular devices are given. You can fetch this details there.

If you received a good main and t-con, cables and plugs are good, there isn't anything left other than a panel issue. Try unhooking one flat ribbon cable at a time and see if you get half a picture.

Check the disc. The disc could be full or the disc could be the wrong format. The disc could have smudges on the back of it. Clean the disc. Remember, DVD -R can only be recorded one time. If you mess up, you can not record on it again. Once a DVD-R comes out of the tray, it is automatically finalized. You can not add to it. I recommend using DVD+RW. It is user friendly disc.

3 blinks can be several things, but generally is power supply failure, test the various voltages in the power supply.

That is the right amount of voltage the issue is when one or more of the individual LED lights fail, the current changes and the power supply senses it and shuts down.

Check power setting and change it.....

1 (866) 579-7172 this is Netflix customer support phone number. Basically their are at least 9 way to contact them the link is below. Good luck. https://gethuman.com/contact/Netflix/more

https://www.google.com/search?q=LG+RC185+replacement+remote+control+Egypt ..

Even if you have the part number I'd be surprised if parts would be available for a CRT TV

Sometimes they will work on a series by the same make, say 4100, 4120 and 4150. They aren't programmable to another device. Sell it on eBay.

The panel or the mainboard is bad and is broken for your TV. Or it could be caused by electromagnetic siginal interference from appliances in your house.

First off, a main board will never cause a backlight issue like this, the main either turns them on or it doesn't. The inverter for the backlights on this and a few other LG sets have the current tolerance extremely sensitive, there are 2 supplies driving the backlights, one supply for 4 strips the other for 6 and each is independent where one can work and the other not work. Where did you buy the LED lights? Were they some off brand knock off lamp strips or did you get them from a reputable place like shopjimmy? A gut feeling is you have bad lamps, the power board seldom gives issues on this model, if you get them from shopjimmy have them send you another set. Also it's possible for the lamps to work on a LED tester but not work in the TV, I've seen it many times.

Question edited for clarity. Question moved from Computers to LG Television. Try the fix in the video https://www.google.com/search?q=LG+50PV400+reset ..

Unfortunately you have encountered a common issue with home television repair. This article explains. https://www.fixya.com/support/r29790007-repairing_own_television We do have one television expert here named Larry, and hopefully, he will chime in. I can't find anything on 'blink code 8'. That new board is faulty.

Model would have helped, a lot of LG sets have had LED backlights that fail, this may be your issue

Timing control board.

Just enquire about it at the authorized service center for LG.

Where did you buy the replacement main board from?

Hi, I think that LG uses a specialized motherboard that allows the missing features to work. So, if you didn't get the motherboard from LG, this could be the issue. You can reach out to LG to ask if they can supply you that. Thank you.