Westinghouse RMT-05 TV Remote Control for LTV-27W6 LTV-27W6HD LTV-27W7 LTV-27W7HD TV Models - Page 9 - Answered Questions & Fixed issues


That TV is about 12 years old and is wearing out. It will cost you more to repair than purchase a new one. If you keep frying to use it this machine will eventually just quit. It will cost 50.00 just to look at it.

Westinghouse... | Answered on Dec 04, 2017 | 129 views


The code will be in a compatible remote control.

Westinghouse... | Answered on Nov 28, 2017 | 95 views


Chances are its not the speaker but the audio output issues and that is located on the main board, you can replace that board or just use a stereo or sound bar for sound

Westinghouse... | Answered on Nov 22, 2017 | 714 views


I don't have a service manual for your set but I believe the LED driver is part of the power board, did you test the voltage going to the LED panel?

Westinghouse... | Answered on Nov 16, 2017 | 123 views


Its either the main or power board, check and see if you have a voltage change on the PSON pin when you turn the set on, if you don't then chances are its the main if there isn't a change I'd try the PS...good luck!!

Westinghouse... | Answered on Nov 08, 2017 | 77 views


Standard default passwords are 1234 or 0000 or 9999 or 2249 try those first. Otherwise you can also try 999999 000000 123456 if you can enter 6 digits. Also try "Reset All" on some models that does not require a PIN. if all else fails Westinghouse support should with it.

Customer Service Request WE

Westinghouse... | Answered on Nov 04, 2017 | 1,602 views


I had the same problem on my Westinghouse 32 inch TV. The internal main power supply went bad and had to be replaced. I had a TV repair shop do it. It was about 8 years ago. Haven't had a problem since. I think it cost about $70 for parts and labor. Nowadays TVs are pretty much a throw away item if they go bad. TV repair shops are getting hard to find plus the cost of TVs has come down so much sometimes you can get a new set for what the repair would cost!

Westinghouse... | Answered on Oct 25, 2017 | 1,138 views


Make sure everything is on. Make sure tv input is set to what you have the satellite plugged into.

Westinghouse... | Answered on Oct 25, 2017 | 28 views


That is a hard board to find, I had a set I was working on a few months ago and couldn't find one so I ended up repairing the one that was in the set

Westinghouse... | Answered on Oct 21, 2017 | 34 views


You can get one online for only a few bucks...look at the male plug on the set, there are 3 kinds of plugs used, one is like a computer monitor 3 prong plug, another is a 2 prong round on one side and square on the other and the 3rd is a 3 prong but its rounded on the ends, unfortunatly there are a few models that use a transformer hopefully yours isn't one like that...here is the most common one in Westinghouse....https://www.ebay.com/itm/AC-Power-Cord-Cable-for-Westinghouse-LCD-TV-10-Feet-10Ft-Extra-Long-/172208931835?epid=1970030091&hash=item281873c3fb:g:wb4AAOSwIzNXOfJD

Westinghouse... | Answered on Oct 20, 2017 | 31 views


Use the input button to scroll through the various inputs tell you get to cable antenna...then select to auto scroll to find active channels, thats all that is to it

Westinghouse... | Answered on Oct 19, 2017 | 73 views


Google it is the best way to find out

Westinghouse... | Answered on Oct 14, 2017 | 31 views


The power supply could be failing.

Westinghouse... | Answered on Oct 12, 2017 | 127 views


that is a signal issue with DISH not Westinghouse. try to ajust the dish for best optimal signal strength. sometimes wind and other objects damage or block signal

Westinghouse... | Answered on Oct 04, 2017 | 55 views


That is a main board issue. Needs replacement if you resetting the electronics to factory defaults does not cure the issue.

Westinghouse... | Answered on Sep 23, 2017 | 38 views


Hi there.

Press and hold the Mode button for the device until all the Mode buttons light up. Release. The selected Mode button flashes. To display the remote control address, press and hold the SAT Mode button until all the Mode buttons light up.
Goodluck

Westinghouse... | Answered on Sep 23, 2017 | 33 views

Not finding what you are looking for?
Westinghouse RMT-05 TV Remote Control for LTV-27W6 LTV-27W6HD LTV-27W7 LTV-27W7HD TV Models Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Westinghouse Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

Cindy Wells

Level 3 Expert

6073 Answers

CoppellTVRepair.com

Level 3 Expert

778 Answers

Are you a Westinghouse Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...