20 Most Recent Cavs JB-99 - Page 9 Questions & Answers

1. Open internal fuse 2. Defective power supply

You posted to Television and Video category? All questions need full 'make model (what it is)' first 3 words. Or this happens https://www.google.com/search?q=model+9876 ..

Without brand and model, I am hard pressed to help. Even if I had that, some sets have a limited number of buttons on the side that might allow switching input. I would even try disconnecting the HDMI cable or other cabling to a DVD, turning off the set and turning it back on.. But before you do that, look for an input button. On the side of your TV, look for an INPUT button. Press the INPUT button to cycle through each HDMI port and available option. Keep pressing the INPUT button until you find the correct input for your device. If your remote does not respond to a change of batteries, you may be destined to acquire a universal remote from somewhere like Wal-Mart or Amazon.

Question edited for clarity. The LED light is a standby light and is on all the time the set is powered on by its On switch. All sets have Buttons on the set itself, they are either on the lower left or right edge, or the latest craze is to put them on an angled panel on the rear of the set. If you have a smartphone, you can test the remote. Aim the front of the remote at the front facing selfie camera whilst in photo mode and press the On button on the remote. You should see a red flash on the phone screen. Try a Power Reset. Remove the television wall plug for 5 minutes and then plug it back in. ..

The Secondary Language Option comes from the device you are using to generate the signal. That would be the DVD Player, or the Cable Box. https://www.google.com/search?q=Change+sap+on+bright+Star+remote ..

It seems like you're referring to a Magic Chef model 990ST, possibly a kitchen appliance. If you're trying to restore sound or resolve sound-related issues on a Magic Chef appliance, here are some general steps you can take:

1. Check Volume Settings:
   • If the appliance has volume controls, knobs, or buttons, make sure they are set to an appropriate level.
   • Look for any mute buttons and ensure they are not activated.
2. Refer to the User Manual:
   • Check the user manual that came with the appliance. It often contains troubleshooting tips and information about common issues.
3. Power Cycle:
   • Turn off the appliance completely and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can sometimes resolve temporary glitches.
4. Check Connections:
   • Ensure that all cables and connections related to the sound are secure. Loose or disconnected cables can result in audio issues.
5. Test with Different Inputs:
   • If your appliance has multiple input sources (e.g., different burners on a stove), try using a different input to see if the sound issue persists.
6. Contact Magic Chef Support:
   • If the above steps do not resolve the issue, consider reaching out to Magic Chef's customer support. They may provide specific guidance or recommend further troubleshooting steps.
7. Professional Assistance:
   • If the appliance is under warranty or if you're not comfortable troubleshooting it yourself, consider contacting a professional technician for assistance.

Remember that the steps may vary depending on the specific type of Magic Chef appliance you're dealing with. If it's a kitchen appliance like a stove, oven, or microwave, the user manual should provide guidance on sound-related issues. If you provide more details about the specific appliance and the sound-related problem you're experiencing, I may be able to offer more targeted advice.

It appears there might be a typo or a misunderstanding in the model name you provided. I couldn't find information specifically related to a "NM200TAVPE MEGA MOVER LI." If you are trying to take the back off a device, it's important to note that disassembling electronic devices can void warranties and may require special tools and expertise. However, if you are looking to remove the back cover of a device, here are some general steps you can follow. Please keep in mind that these steps may not be directly applicable to your specific model:

1. Power Off:
   • Make sure the device is powered off and unplugged from any power source.
2. Check for Screws:
   • Look for screws around the edges of the back cover. If there are screws, use the appropriate screwdriver to remove them.
3. Pry Open:
   • After removing any screws, gently pry open the back cover using plastic opening tools or a case opening tool. Be cautious not to damage the device or any internal components.
4. Look for Clips or Latches:
   • Some devices have plastic clips or latches holding the back cover in place. Carefully examine the edges for these and use a plastic tool to release them.
5. Refer to User Manual:
   • Check the user manual or any documentation that came with the device for specific instructions on how to remove the back cover.
6. Manufacturer's Support:
   • If you're unsure or unable to find information, consider reaching out to the manufacturer's customer support for guidance. They may provide specific instructions or warnings.

Remember, if the device is still under warranty, opening it up may void the warranty. Additionally, certain devices may have sealed backs, making it challenging for users to access the internal components. If you can provide more accurate information about the device or its intended use, I may be able to offer more precise guidance. If it's a specific product, checking the manufacturer's website or contacting their support is often the best course of action.

If your Quantum DVD player is displaying a message saying "Do not watch DVD" in the middle of a movie, it could be due to a variety of reasons. Here are some steps you can take to troubleshoot and resolve the issue:

1. Check the DVD for Damage:
   • Inspect the DVD for scratches, smudges, or other damage. A damaged DVD can sometimes trigger error messages.
2. Clean the DVD:
   • Clean the surface of the DVD using a soft, lint-free cloth. Wipe gently from the center of the disc toward the outer edge.
3. Try Another DVD:
   • Test the DVD player with a different DVD to see if the issue persists. This can help determine whether the problem is with the specific disc or the DVD player.
4. Firmware Update:
   • Check if there is a firmware update available for your Quantum DVD player. Manufacturers often release updates to address bugs and improve compatibility.
5. Check for Region Code Issues:
   • Ensure that the DVD is compatible with the region code of your DVD player. If the region codes do not match, it may trigger error messages.
6. Reset the DVD Player:
   • Turn off the DVD player, unplug it from the power source, and wait for a few minutes. Plug it back in and turn it on. This can sometimes resolve temporary issues.
7. Inspect for Foreign Objects:
   • Open the DVD player tray and check for any foreign objects (dust, debris, etc.) that may be interfering with the playback. Clean the interior of the DVD player if needed.
8. Contact Quantum Support:
   • If the issue persists, it's advisable to contact Quantum's customer support. They may provide specific instructions or recommend further troubleshooting steps based on the model of your DVD player.

Remember to consult your DVD player's user manual for model-specific troubleshooting steps and information. If the problem persists and the DVD player is under warranty, consider seeking professional assistance or returning it to the manufacturer for inspection and repair.

The symptoms you've described, including a flashing power button and a popping noise when trying to turn on the TV, indicate potential issues with the power supply or other internal components. Here are some steps you can take to troubleshoot the problem:

1. Unplug and Wait: Disconnect the TV from the power source and wait for about 10-15 minutes. Then, plug it back in and attempt to turn it on. This allows the TV to reset and can sometimes resolve temporary issues.
2. Check Power Supply: Verify that the power supply to the TV is stable. Ensure the power outlet is functioning correctly, and try plugging the TV into a different outlet. If possible, test the TV with a different power cable.
3. Inspect for Physical Damage: Examine the TV for any visible signs of physical damage, such as burnt components or damaged cables. If you notice any, it may indicate a hardware problem that requires professional repair.
4. Perform a Hard Reset: Some TVs have a reset button or a specific procedure for a hard reset. Refer to the TV's manual or contact the manufacturer for instructions on how to perform a hard reset.
5. Check for Error Codes: Look for any error codes or diagnostic indicators on the TV. Refer to the user manual or contact the manufacturer's support for information on interpreting error codes.
6. Professional Inspection: If the issue persists, it's advisable to seek professional help. A certified technician can diagnose and repair internal components, such as the power supply or main board, if necessary.
7. Contact Manufacturer Support: Reach out to the manufacturer's customer support for guidance. They may be able to provide specific troubleshooting steps based on the symptoms you've described.

Given the popping noise, it's important to exercise caution and avoid attempting repairs if you are not familiar with electronics. Internal components of a TV can carry high voltages, and improper handling may lead to injury or further damage. If the TV is still under warranty, consider contacting the manufacturer for warranty support or instructions on the next steps. If not, seeking professional assistance is recommended for a thorough diagnosis and repair.

It appears to be Australian https://www.google.com/search?q=Allure+AL-32lcd+television ..

NECESITO SABER CODIGO DE ACCESO TV LED DEC32 WESTINGHOUSE

Check if the volume knob on the DVD player is stuck or damaged. If it is, try cleaning it with a soft cloth and see if that helps. If the volume knob is not the issue, try cleaning the laser lens inside the DVD player with a cotton swab and alcohol. This can help remove any dirt or dust that may be interfering with the player's operation. If the above steps do not work, try resetting the device by holding down the power button for about 10 seconds. This action refreshes the system and closes all running processes, potentially resolving the glitch. If this does not work, I suspect you would have to have a repair shot take a look or consult customer service of the device.

First try to setup your TV using manual. If it does not work, then see page 35 troubleshooting of service manual for help. L42E77.XLS (manualslib.com)

According to a number of web site blogs, consensus of opinion points to a tv, made in Slovakia and possibly a rebranded bottom end Sharp. It doesn't seem to matter though because TV's are so reliable now and with a 12 month warranty, for £200 with all that on it, who really cares?
It is made for Costco, Sainsbury, Tesco bla bla bla.

Hello, this happens when the HDMI connection on either device has failed or the HDMI cable is bad. Can you still access the television menu with a button on the television or from its own remote? When this does not help and unplugging the television, for some time did not, then take a clear flashlight and shine its light everywhere on the screen. When the backlight is broken, you can still see what is on screen in that small lit spot. This is a common failure and can often be repaired. There are video's about it on YouTube. Capacitors for the power supply hold high voltage so unplug the set from the mains and wait a little before even opening. Still never touch those small towers. When their top, that looks like divided in three parts, isn't flat anymore then there is a power issue and those capacitors must then be replaced.

Make and model may help you get an answer.

See page 14 of this manual ???TP.MS638.PC822-02A,??SINOTEC

If you're having trouble getting your OTA channels to work on your ProView 3200 flat screen TV, there are a few things you can try:

1. Verify that the antenna is correctly and securely plugged in by checking it. Try raising your over-the-air antenna if you're using one, ideally so it's close to a window. To determine out which way your antenna should be pointed, you may also use an online station finder.
2. Restart the TV: Press the power button to turn off your TV, then disconnect it from the mains, wait two minutes, plug it back in, and press the power button again to turn it on. Try launching an automated channel search on your TV after it has restarted.
3. In the event that your TV is still unable to pick up channels, check the tuner and make sure the coaxial line is in working order.

I hope this helps you restore service to your OTA channels!

Question edited for clarity, proper name of the television maker. Probably failing capacitors. Take it in for repair. ..