20 Most Recent
RCA Universal Remote Control - Page 2 Questions & Answers
Ok i have a rca remote trying tp program it to a
Here are some codes for your Emerson TV.
065,067,075,076,079
011,026,027,028,029,030
031,032,037,042,053,064
Here are some instructions as well for your RCA Remote:
Programming a device using the Code Lists:
- Find codes for each device and brand below.
- Press and "HOLD"
CODE SEARCH.
- Press and release the TV, VCR or Cable button you want
to set up. If programming AUX for a device, press and release AUX first
and then the device to be programmed (TV, VCR or Cable). When the selected
device button flashes proceed to the next step.
- Enter the three digit
code from the TV, VCR or Cable Box code lists.
- Release CODE SEARCH.
- With the device on, press another button, for example CHANNEL UP. If
the device responds, no further programming is required. If the device
does not respond, repeat steps 1-5 using another code number from the lists.
Hope that helps.
I have a Trutech PLV1615T TV and a RCA RCR311
RCA Universal Remote Control Programming Codes
Programming Your Universal Remote.The remote may already be set up to operate your brand of TV, VCR, or Cable Box. It is pre-programmed with following codes:
y
TV-000
y
VCR-000
y
Cable Box-000
y
AUX is programmed with VCR code 037For brands that require programming, there are two ways to program: Using Code Lists or CodeSearch. Use Code Search if the code lists are not available or if the codes from the lists do notoperate a device.Programming a Device using Code Search:1. Manually turn ON your device (TV, VCR, Cable Box)2. Press and "HOLD" CODE SEARCH3. Press and release the device button you want to set up (TV, VCR, Cable Box) However,if you are using AUX for a device, press and release AUX first and then the devicebutton for the type of device to be programmed (TV, VCR, or Cable). The selecteddevice button will flash once.4. Release CODE SEARCH.5. Press OFF/ON repeatedly until the device turns off (you may have to press up to 100times at a rate of once per second).6. Once the device turns off, press and release ENTER.7. With the device on, press any other button. If the device responds, no further programming is required. If the device does not respond, repeat steps 1-6...Hope this helps! Parsos215
Find the code for my RCA Universal remote for my Panasonic TV
Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily...
http://electro-medical.blogspot.com/
Remote wont get fpa off
Most RCA sets use a
four digit code to control the v-chip. The code reset is different depending on
the model. Try each number until you find the one that works for you.
1.
Hold down the
MENU button on the remote and VOLUME DOWN button on the TV it's self at the
same time for at least 4 seconds. The set won't say so, but the lock will be
unlocked
2.
Hold down the 0
(zero) button on the remote and the VOLUME DOWN button on the TV itself at the
same time for at least 4 seconds. The set won't say so, but the lock will be
unlocked
3.
Hold down the
MENU button on the front of the TV and the TV button on the remote at the same
time for at least 4 seconds. 4- Hold down GO BACK button on the remote and MENU
button on the front of the TV at the same time for at least 4 seconds.
Hold down EJECT button
on the front of the TV set and the MENU button on the remote at the same time
for at least 4 seconds. Depending on the model, one of the methods should
unlock the V-chip. Now, if desired, you can change the settings on the V-chip
by going to the MENU and going to PARENTAL CONTROLS, or on some sets, going to
MENU and then going to TV SETUP, then to V-CHIP SET.
Rca remote won't change different inputs
1) test the batteries for dead2) clean the contacts batteries 3)tight the springs contacts batteries with long pliers for better contacts4) open the remote control clean the KEYPADS for dirty, oxide, corrosion and fix itl5) try it6) if doesnot work,you must go to the repair shop TV for fix it.God bless you
Program RCA universal remote with Panasonic TV
If you have the owner manual for the remote try all the panasonic codes or google for that with the model number of the remote--not all remotes will program for all models and if programs it may be missing key features the original remote had.
I have this RCA Universal remote (RCU410WMS) and I
RCA's site list codes
25 and 006 for Magnavox cable boxes. Maybe one of these will work for the converter. The
RCA site has a link so you can look up codes. Click on "find your remote control codes here" and pick your model number, then the type of device you want to control. If the codes I gave don't work, maybe try some of the other brands of cable box codes. You might find one that will work.
I am trying to program
Try 003, 054, 055, 062, 070, 148, 149, 170 or 171. They seem to be consistent numbers for the Panasonic TV's.
You might have to enter a different code for the VCR.
Try 246, 285, 334, 340, 350, 363, 373 or 374.
I couldn't find any codes in my library for a TV/VCR combination so the remote might have to be coded separately for each component.
Hope this helps
Not finding what you are looking for?