20 Most Recent RCA P52926 52" Rear Projection Television - Page 2 Questions & Answers

Yes that would be the model number. What item are you needing assistance with, as I have so many people I am helping that I need you to indicate the problem unless you respond by the origional post. Let me know what you need help with and I will be able to help you I have alot of experience with RCA/Thomson models

Power board. Find honest TV tech.

This is a older model; Check on the label on the back where the model number is------somewhere there should be a chassis number like PTK195.

It sounds like a convergence problem and these sets rarely have them.

If it is a PTK195 there is (with back removed and set unplugged) a small circuit board suspended above the main boards to the right as you look from the back.

This is (if it is there) the power supply for convergence and most of the time one of two diodes is shorted--------easy to get that board out and I can pinpoint the two diodes IF THIS IS A 195 CHASSIS.


LET ME KNOW WHAT YOU FIND---I am here to help you. If this information told you something you did not know rate this solution as very helpful as I do this here for free.

REGARDS, SD TECH

It is very possible to replace it, but it is difficult for private consumers to purchase them. In addition, depending on the TV, it can be very hard to do the replacement.

I would recommend getting a quote from your local repairman and then deciding if it is worth the cost.

If you REALLY want to try it yourself, you can get parts from sites like this one: http://store.audioholics.com/section/13/1/replacement-lamps---bulbs

When you first turn your cable tv on go to the customer menu and turn off the G+, you should find it in your set-up section.

MY RCA HOME THEATER TV MODEL # P52937SG WONT TURN ON WHAT MIGHT BE THE PROBLEM

It uses 3 PICTURE TUBES AND DOES NOT USE A LAMP OR BULB.

The error is likely to be from the satellite as the set model listed does not have that kind of error.