Top 20
RCA Scenium HDLP61W151 61 in. HD-Ready Television - Page 4 Questions & Answers
My RCA Scenium picture just went black out of no
Take the Lamp out and see if it is shattered. The access door is on the left rear of the set. Chances are the lamp is the problem. The Lamp cage has the part number on it.
I hope this helps,
Skyassoc
12/26/2009 11:24:51 PM •
RCA Scenium...
•
1,475 views • 2 helpful votes
How do I hook up a Wii?
You may be able to channel down on the tv from channel 3 to get to inputs. If not and there is no input button on your tv you will have to get a modulator from walmart or order a new remote for the tv. Do not get a universal remote.
I have an RCA Scenium. When I turn power on it
it may just be components on the power supply board have small breaks that keep power from flowing until the board warms up and the breaks are closed.
This repair will take someone with a knowledge of your tv and a good eye to inspect the circuit boards. The plus side...it should be a simple fix once the breaks are found. Keeping costs to a minimum.
Good luck and be careful
No red color
You have a bad red tft panel in the light engine. I hope your unit is under warranty as the light engine for this unit is $780 at
www.encompass.com They usually are the cheapest. Replacing it is straightforward if you have some mechanical and electronic capabilities. Remove the back. Remove the screws holding the engine in. Slide to the back. Remove any wires marking them for proper reassembly. Remove the light engine from the circuit board. Reverse the order for reassembly. Your unit should be ready to go. Let me know if you need anymore help.
hardrocko
Thanks for using FixYa
Sound with No Picture
If the lamp hasn't been replaced I would suspect it first. Depending on your full model number of your TV will determine the lamp you need.
Model HDLP61W151YX1 = 260962 LAMP
Model HDLP61W151YX2 = 265103 LAMP
The sticker with the model number will have a service model number that will include the YX! or YX2 at the end of it.
Please take a few moments to rate my answer. Thank you.
MY HD65W140 NO PICTURE NO SOUND NO POWER. STARTED
hi Amelero, looks like your TV power supply board is shorted, this happens when high voltage peaks and unusual power outages occurs, it needs to be checked thoroughly, Usually the power supply board is completely replaced, so check out first your dealer if its is on warranty, else call for service, I don't recommend tinker with it, its so sophisticated that even us tech guys gets headaches so we replace the entire board. These also goes to other experts too.
There is still possibilities to repair the fallen board but this method takes time.
When my screen is blank,
Its a good possiablity that the Light engine is the problem, first Ck over on power supply Board if you do not see any Bad capacitors sometimes this will throw you and can cause problems in video. Chances are it is the Light engine Encompass Parts Distr. Lists your TV But has HDLP61W151yx or 2 yx or 3 yx or yx4 Go by the model number that is yours it will be on back of TV then once you know which one it is Go to Encompass online or Call 1-800-638-3328 find out correct Light Engine number They list the yx1 Part# as 263223 this one List for $769.00. OK heres another company that sometimes Gives return DUD FEE for your old Light Engine and it makes it cheaper UED Call 1-800-648-6657 and Try E-Bay under Electronics I have seen some good deals on Light Engines thier with Good warranty as well.
Our Scenium HDLP5W151 TV Is dark and the lighting
Bad Light Engine part# 261589 $800.00 Call UED for price of rebuilt one 1-800-648-6657 First Look on the power supply board and see if you have any bad capacitors if you see any that are puffed up on top they are bad. 1000uf 16v 2200uf 25v If everything looks ok then it will be the light engine.
I currently have no sound. It comes back every
Let verify first to narrow down to where the problem can be, attach the powered PC speakers to the Audio Line out RCA jacks to see if you can get the sound there, if you do, then the problem can be in the power amp circuits, if you do not get the sound at RCA jacks, then the problem can be in the sound processor circuit. Please post back what you find.
I replaced bulb, I have
If bulb is new, try resetting bulb life timer by owners manual, If needed, test and/or replace the ballast which controls power to bulb.
Not finding what you are looking for?