Top 20 Broksonic CTVG-5463GVC 19" TV Questions & Answers

www.retrevo.com/ Try this link to download the manual for free. Electro help

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ V-Chip unlock procedure and codes to many popular brand TVs are given.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Unlock procedure to many popular brand TVs are given.

031,038,030,037. Try these codes.For more information http://electrohelponline.blogspot.com/Setup procedure, and setup code list to many popular remote controls are given.Pull up older posts.

The Dish remote only has about 50 codes built into it---suspect it will not program to the brooksonic.......

The TV is in protection mode. There is some shorted component/s on its main board. Contact any experienced service technician.

Check these codes.0062 0004 0009 0135 0189 0183 0227 0456 0008 0068 0075 0141 0161004, 006, 008, 019, 062, 068, 069, 074, 075, 076, 077, 088, 116, 161, 183, 184

Make a factory reset to this TV. Refer to its user manual for details.

Hey there, Cheri Torres with DISH Network Customer Service here. I came across your post and wanted to see if I could help. Each of our different models of remotes have a few different codes that could work. I will list here for you the best codes for the more popular models of remotes that we have and the instructions for addressing the remote to the TV. I hope this information helps and if you have any further questions please let me know! Remote Model #'s Codes for TV3.0, 3.1, 3.2, 3.4 IR remotes - codes 720, 748, 752, 661.5.0, 5.2, 5.3, 5.4 IR remotes - codes 720, 748, 752, 656.4.0 and 4.4 IR/UHF remotes - codes 720, 748, 752, 721, 656.6.0, 6.2, 6.3, 6.4 IR/UHF remotes - codes 720, 748, 752, 533, 656.20.0 IR and 21.0 IR/UHF remotes - codes 834, 899, 750, 748, 533, 622, 754.Instructions for addressing the remote to the TV

1. Turn the Television On.
2. Press and hold the TV mode button until all the mode lights light up red.
3. Enter the three-digit code using the buttons on the number pad.
4. Press the pound(#) button once. Note: The LED will flash three times.
5. Test functionality with the TV.
6. Return to Step 2 if the remote is not able to turn the TV On/Off, change the volume and mute the television.

hi! i have here a couple of codes for your tv, just try them 1114, 1121, 1382, 1383, 1484, hope this helps! goodluck!!!!

you must go into the menue and set up wich is gona be hard because you are in another language but good thing is setup usualy the first menue selection once the main menue comes up then you gota figure out witch one says english snd hit enter

http://safemanuals.com/user-guide-instructions-owner-manual/APEX/GB43HD09-_E try that :)

Try these codes:

136 / 147/ 121 / 111/ 112/ 114/ 122/ 123/ 124/ 173 /

004/ 009/ 014/ 023/ 024/ 025/ 026/ 027/ 030/ 032/ 033/ 034/ 035/ 036/ 037/ 038 /

One of these codes should work.

Good luck and have a great day!

THE CODE HAD TO BE ENTERED BY A USER NOT THE FACTORY, WHEN THE TV IS SHIPPED FOR SALE NO CODE IS IN THE CHANNEL LOCK, SOME WHERE ALONG THE LINE SOMEONE INPUTTED A CHANNEL LOCK CODE, SO WHAT THIS LEAVES U WITH IS THIS, YOU MUST CONTACT THE MANUFACTURER OF THE TV AND SEE IF THERE IS AN OVERRIDE CODE THAT U CAN PUT IN TO DEFEAT THIS CODE LOCK, THERE IS NO OTHER WAY TO BYPASS/RESET THE CODE.

I first need to know the brand of your tv or the model this would help me
out then i can tell you how to program your remote thanks

Hi

Universal remotes can use 3, 4 or even 5 digits in these codes. Ideally you need to specify the exact remote make and model of the remote for me to answer this question.

However - I have a number of 3 and 4 digit codes that are associated with Broksonic TVs.

If your remote uses 4 digit codes you will need to go through each of these until you get one that works.

Broksonic TVs commonly use these;

1114, 1121, 1382, 1383, 0147, 0135, 0250, 0257, 0310, 0394, 2053, 2072, 2284
These are the 3 digit codes
236, 463, 003, 180, 277.

Hope this helps. Please do rate my answer. Thanks.

have aq service tech come and check your digital tuner. first check and see if you are using that particular tuner. some tv's come with two types a digital and an analog tuner.

go to codebreakers and look for the code/Hack

If you have original remote for t.v. , hit the button under the sleep timer button on remote, and eventually the closed cation words will be removed from the bottom right corner of t.v. Hope this helps , good luck .....

I need to know how to program a sv 2000 tv with a rca universal control