20 Most Recent
Westinghouse LTV-32w1 32 in. HD-Ready LCD Television - Page 10 Questions & Answers
Picture goes out but the
Common problem on this model is bad solder joint on the power supply board. See pictures here:
http://s807.photobucket.com/albums/yy352/budm/Westinghouse%20LTV-32W1/
First, look at the screen in darkened room to see if you can see any slight glow from the screen, if it does, then the problem can be the T-CON (not getting the 12vdc) or the main logic board not feeding the signals to the T-CON board.
if not, next place to check will be the power supply module, make sure it has 24vdc which is required by the backlight inverter to work, the reason for not having 24vdc can be from bad DC filter caps (leaking/bulging top, high ESR) or short circuits in the inverter board which will cause the 24vdc supply to go into shutdown mode, so you may have to disconnect the power cable that feed the inverter board to see if the 24vdc will work without the inverter board hookup, you will need to apply about 3~4 amp of load to the 24vdc to make sure it can handle that. There are fuses on the backlight inverter boards also. So there is some troubleshooting you will have to do to find out the causes of the problem you are having.
If you are going to DIY and have proper tools, electronics knowledge, and know safety precaution then please read on:
Please see my basic troubleshooting guide here:
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide
Failed TV and Monitors: http://s807.photobucket.com/home/budm/allalbums
http://en.wikipedia.org/wiki/Capacitor_plague
Parts: www.shopjimmy.com
Capacitors kit: http://lcdalternatives.auctivacommerce.com/Default.aspx he can make you a set of caps.
Please post back what you find
When i turn it on the light under the screen is
Tries unplug,replug the tv and cable box an hour later.The tv should now,reset itself back to the factory setting.The cable box resetting and it upgrading it softwares.The tv should work now.
I have a 42" LCD
Sounds like the Display Cracked. This is not the first time I heard of a display breaking on Westinghouse and Poleroid LCD TV's as they are made in the same plant in China. Sorry to say a new display will cost more than a new TV.
Just trying to connect the HDMI using a cox cable
This TV doesn't have an HDMI port. You can use a DVI to HDMI adapter or the component video. (I assume the Cox cable has component video out.) You will need to connect an audio cable as well. There are 2 DVI-HDCP ports.
I wish that I could be of more help.
Cindy Wells
I have an older Westinghouse
examine the power supply of your tv a defective/bulge capacitors can cause this problem replace it with the same value.you can easily identify a defective capacitor they appear bulging deformed and melting.you have to open the back cover of your tv to access the power supply this is were the power cord is connected.thanks and please post a message if you have further question..if my solution solve your problem please do click the thumbs up button for my rating..
Have a westinghouse HD lcd
Usually a color missing is a bent pin if you are using it as a PC monitor. Definately check your cables and see if the problems follows the input selections. If it does it most likely is a electronic component failure. Of course this assumes the settings aren't randomly messed up. You might be wanting to invite that guy that always has things taken apart when you visit...or start watching online sales...head's up on repair bills...a similar product costs $400 new, 300 refurbished.
Not finding what you are looking for?