Top 20
Westinghouse LTV-32w1 32 in. HD-Ready LCD Television Questions & Answers
My westinghouse ltv 32w1 will turn off after being
The internal circuit has an intermittent short and disconnect. Generally this is due to excessive heat or a fractured wire. If it is related to the circuit board, components can migrate; cause a short, and cool down and make contact again. Many issues.
An on again, off again issue at some time will end up with complete loss of activity at some time down the road. If the TV is not too old and you value it dearly, simply have it repair by a service technician. Other than that, with new TVs around $300, don't waste money on old technology.
The tv will turn off after two or three days of using it. And in the back of the tv the spdif light is on. spdif is out.
Fault to the main power supply regulator section. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.
Can the zoom be adjusted without a remote?
Yes if in the settings menu, check in menu and look for format or wide usually in settings. If you do not see this than no may only be on the remote, but u can buy a universal like a 3 function RCA remote and look on the remote for the button format, wide, or a outline of a picture and program to the tv and it should do it for u. Hope this helps, thanks.
I have a ModelVK-42F240S that has no audio. Anything to try to cure the problem? Westinghouse TV
Hi, bad speakers in many flat panel TVs is a common problem. There will be av out sockets at the back of your tv. Please connect the audio from here to any amplifier or any music system you have. If you get the tv programme sound, most probably the speakers are bad. In case you do not get sound, your tv is not producing it. If the speakers are bad and you can change yourself, give it a try. Otherwise show the set to someone qualified to repair it.
How do I reset the color balance to default
Refer its user manual for details. How to set it the color to its default settings, is described by it. Try a reset too.
To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; check the site linked here.
Pull up older posts. Surf the site with patience.
http://electronicshelponline.blogspot.com/
Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done.
No sound on tv
try to check ,speaker, open coil, or open wire contact, if found ok try replace audio ic, if found ok , try AF IF driver amplifier stage.
Not finding what you are looking for?