20 Most Recent GE TruVision DVR 10, 4-channel, H.264, 250GB - Page 4 Questions & Answers

i changed my GE DVSR admin password but forgot to note down how do i reset it to dafault/factory default

Hi, these are usually available in a service manual, these may be obtained from the 'net, or by a direct approach to the manufacturer.
Use the exact make and model and the words service manual when doing a Goggle search. or make direct contact to he manufacturer.

hi,
You have to check the fuse inside the system . If there is any power surge happened then there is a chance for fuse become faulty. As you mentioned it would be a power side problem. first of check the fuse inside the system. Also you have to check the 16.5V transformer which provides the working voltage to the sysatem when it is line. If need any more assistance from me then you can contact me through fixya. One more thing is if can add any picture of the cotrol panel circut board then it will be very helpfull.
ok

Communication failure will clear itself once your phone lines are restored. Try arming your system and opening a door to set the alarm off, a forced signal will usually clear a communication failure. As far as parts, you can get them pretty cheaply from a local Alarm Company or dealer. Give them a call, most local, small dealers are fair and helpful. Easy to install yourself as well.

www.pixim.com/assets/files/.../FINAL_DM2_DR2_datasheet.pdf
http://www.gesecurity.com/portal/site/GESecurity/menuitem.f76d98ccce4cabed5efa421766030730?selectedID=719&seriesyn=false&t=prod
Above is a link to the manufacturer, contact them and i am sure they will help. I have searched the net, but there is little info to be had?

Hi.

Regarding the phone line, see page 24-25 on document below.

Use RJ11 connector to connect the phone to Simon, then connect Simon to the landline.

This is the connection sheme:



To program the system you need to use the System Menu (see from page 40)

To enter the system menu, press either the scroll up/down or Enter buttons in the upper right of the panel. Press the STATUS button to exit a menu or option edit mode and navigate up one level. Pressing the STATUS button while in the top menu level exits the system menu level.

To enter system programming mode, do the following:
1. Press the scroll buttons until the panel displays System Programming.
2. Press Enter. The system prompts for an access code.
3. Enter the access code from the codes listed in Table 9. The system displays each entered access code digit as an asterisk.
4. Press Enter.
The panel is now in program mode.

For details on programming options see from page 42 (35 on page) in document here:Installation Manual

Here Key diagram.



Installation Manual

locally if you have a battery plus store they carry alot of differnt batteries, or the alarm co. that installed it, or online you can find them, and worse case is locating the manufacturer is trying to get from them.

Everything sounds ok. Try to add more port in your port forwarding. Actually, even if you don't forward port 80, by default its already open because that is for internet access. Research more port that your dvmre is using. You may want to isolate the problem by connecting your dvmre directly to the modem and check if it works there. If not, maybe your ISP is blocking some port the your dvmre is using.

Nice question. Do you have a specific concern, or an area to protect? I am an expert by experience.

The Various Types of sensors used in the Security Alarm ...

ResearchGate https://www.researchgate.net > publication > 34047974... Apr 7, 2020 - Microwave sensor (2) Vibration Sensors: Vibration sensors are sensors that are used for displaying, measuring, and evaluating linear velocity, ... ..

Wooden flooring is known for its elegant look. It creates a warm ambience inside your home. Hardwood floors are elements of d?cor themselves, which are available in many different types and colours. Its durability will ensure a good interior investment while providing aesthetics to your home.

Like Steve stated. I would add to use a rust-converting primer (the type that converts surface rust into an invert primer, stopping all future rusting).

As this is only occurring in the left corner, I'd try to determine exactly where the water is coming from (that's causing the damage). I suppose it could be condensation if the unit is over ten years old, but it also possible that a connection slightly loose or worn.

(972) 288-7557 · (972) 222-0646 Email is better to make contact.