Sanyo DVD-SL20 DVD Player - Answered Questions & Fixed issues
Why I can't open or close the dvd tray?
You need to unlock the tray. The instructions are in your owner's manual.Common unlock codes are:Power off the DVD and hold the stop button for 5 seconds, then press eject.orPower off the DVD and hold the eject button for 5 secondsSome models need the power on when you do this. I could not find an online manual for details.
Hi, I have a Sanyo
Good day.
You only have to do is remove the top cover of your DVD by unscrewing it.
After that,the internal parts will reveal so you will see the CD tray or the CD mechanism assembly.
Next,when the disc assembly is having a top cover remove it,by loosening all of screw from that cover
And finally you can get the CD from the tray or disc assembly..
Thank you and good luck..
Colours are not comming
Use another set of AV cables to see if it is the DVD player itself or the previous AV cables that might be defective. If it is the DVD player itself, the AV inputs might need to be cleaned.
Sanyo TV power cord removal Model DP19649
It unplugs.https://www.amazon.com/POWER-CABLE-SANYO-DP19241-DP26670/dp/B019XGHRO8orhttps://directtvparts.com/sanyo-tv-dp19649-power-supply-1av4u20c38500-dac-12m069-2995321500/
Cannot scan for channels on remote
The remote model number doesn't help directly. This remote controls several Sanyo TVs including the DP46142 and DP32242. Manuals Lib has the owner's manual (copyright 2012) here:
https://www.manualslib.com/products/Sanyo-Dp46142-77711.html . Press Menu (below and to the left of the arrow keys). Select Setup (the icon that looks like a satellite dish) using the left/right arrows. Press the down arrow and go to ANT/Cable setup. Press OK (in the center of the arrow keys). Use the left/right arrow keys to make sure that the Ant In line is set to Antenna. Press OK. Go down to Auto Setup and press OK. Choose from All Channels, Analog Channels and Digital Channels and press OK again. Select Apply and press OK when the scan is finished. (All channels and Digital Channels will work the same way since most analog channels are no longer broadcasting.) See
https://www.manualslib.com/manual/306779/Sanyo-Dp32242.html?page=22#manual . Note: digital channels will not display if the signal strength is low. You may need a different antenna or a different antenna placement. See antennaweb.org or tvfool.com for suggested station transmitters.
I hope this helps.
Cindy Wells
(note: the physical buttons on the TV should work to navigate the menu. Use the channel buttons for Up/Down and volume for left right. The OK button is the Input button.)
Sanyo amp stuck in standby mode can I pull it out this mode
When in the standby mode the 3 or 5 volt standby voltage is present for the main cpu IC to "wake up" the power supply, and put it to work, this is a signal that is introduced to the power supply when the on button is pressed, or a command from the remote, also if some components are defective and drawing to much current it won't come out of standby as well, this will require some electrical engineering skills to troubleshoot the amp, I suggest you take it somewhere to have it serviced unless you have the knowledge and test gear to fix it yourself.
Not finding what you are looking for?