Top 20 Olympus MJU 400 Digital Camera - Page 5 Questions & Answers

With any sense, you don't. Take it to a reputable service centre, and be prepared for a large bill. May be cheaper just to replace and update.

The issue you are experiencing with your Olympus all-weather 700 camera, where lines appear across the screen when attempting to take a photo, could be related to a problem with the camera's sensor or image processing. Here are a few things you can try to troubleshoot the problem:

1. Clean the lens: Make sure the lens is clean and free of any debris or smudges. If necessary, use a lens cleaning solution and a microfiber cloth to clean the lens.
2. Check the camera's settings: Make sure that the camera is set to the appropriate resolution and image quality settings.
3. Try different memory cards: Try using a different memory card to see if the problem is related to the card itself.
4. Make sure that the camera firmware is up to date.
5. Check for physical damage: If the camera is not under warranty and you have the technical knowledge, it is possible to check the sensor and internal processing for any physical damage.

If the above steps do not resolve the issue, it may be best to contact Olympus customer support for further assistance. They will be able to diagnose and fix the issue or tell you if a repair is needed. It's important to note that the Olympus all-weather 700 is an older model camera, which makes it harder to find replacement parts and professional repair services.

If the dust spot is on the outside of the lens, then a soft brush will do the job. But if it is on the inside, then the only way to get rid of it is to take it to a repair shop where they will dismantle the lens and clean it. You may not need to clean it, if the dust spot does not appear on your photos.

Is the memory card either full or write-protected ?

The issue you are experiencing with your Olympus 770SW camera, where the LCD screen is not showing an image when attempting to take a photo, could be related to a problem with the camera's display or image processing. Here are a few things you can try to troubleshoot the problem:

1. Check the camera's settings: Make sure that the camera's display settings are set to show the live view when taking a photo.
2. Check the LCD screen: Make sure the LCD screen is clean and free of any scratches or cracks.
3. Check the camera's firmware: Make sure that the camera's firmware is up to date.
4. Check the camera's battery: Make sure that the camera's battery is fully charged and properly inserted into the camera.
5. Check for physical damage: If the camera is not under warranty and you have the technical knowledge, it is possible to check the internal processing and the LCD screen for any physical damage.

If the above steps do not resolve the issue, it may be best to contact Olympus customer support for further assistance. They will be able to diagnose and fix the issue, or tell you if a repair is needed. It's important to note that the Olympus 770SW is an older model camera, which makes it harder to find replacement parts and professional repair services.

If you are unable to open the settings menu on your Olympus VG140 camera, there could be a few different reasons. Here are a few things you can try to troubleshoot the problem:

1. Check the camera's battery: Make sure that the camera's battery is fully charged and properly inserted into the camera.
2. Check the camera's firmware: Make sure that the camera's firmware is up to date.
3. Check the camera's manual: Some cameras may have different settings or limitations that affect the use of the settings menu.
4. Check the camera's buttons: Make sure that the buttons on the camera are working properly and not stuck or malfunctioning.
5. Reset the camera: Some cameras have a reset button or option that can be used to restore the camera's factory settings. This can be found in the camera's manual.

If none of the above steps resolve the issue, it may be best to contact Olympus customer support for further assistance. They will be able to diagnose and fix the issue or tell you if a repair is needed. It's important to keep in mind that the Olympus VG140 is an older model camera, which makes it harder to find replacement parts and professional repair services.

If your Olympus E50 camera is not saving photos to the XD card, there could be a few different reasons. Here are a few things you can try to troubleshoot the problem:

1. Check the XD card: Make sure that the XD card is properly inserted into the camera and that there is enough space available on the card for the photos you are trying to save. It's also important to check that the XD card is not locked, damaged, or corrupted.
2. Check the camera's settings: Make sure that the camera is set to save photos to the XD card and not to the camera's internal memory.
3. Format the XD card: Formatting the XD card will erase all data on it, but it can also fix some file system errors. Make sure to back up any important files before formatting.
4. Check the camera's firmware: Make sure that the camera's firmware is up to date.
5. Check the camera's manual: Some cameras may have different settings or limitations that affect the use of the XD card.

If none of the above steps resolve the issue, it may be best to contact Olympus customer support for further assistance. They will be able to diagnose and fix the issue or tell you if a repair is needed. It's important to keep in mind that the Olympus E50 is an older model camera, which makes it harder to find replacement parts and professional repair services.

To reset the time and date on your Olympus WS-852 digital voice recorder, you can follow these steps:

1. Turn on the device by pressing the power button.
2. Press the "Menu" button to access the main menu.
3. Use the arrow keys to navigate to the "Settings" option and press the "OK" button.
4. Use the arrow keys to navigate to the "Time and Date" option and press the "OK" button.
5. Use the arrow keys to navigate to the "Time and Date" option and press the "OK" button again.
6. Use the arrow keys to set the correct time and date, and press the "OK" button to save the changes.
7. Press the "Menu" button to exit the settings menu.

It's important to check the manual of your device to ensure the above steps are accurate, as the process to reset the time and date may vary depending on the firmware version or the model of the device. If you still have trouble resetting the time and date, it may be best to contact Olympus customer support for further assistance. They will be able to diagnose and fix the issue or tell you if a repair is needed.

Check antivirus your CF card. Check in what format are saved images: JPEG or RAW?

You can download the driver software from the Olympus web site.

Hi Unfortunately, it would seem the camera does not have any function to turn off after a period of inactivity.

If your Olympus VN-5200PC digital voice recorder is in "LOCK" mode and you are unable to unlock it, there could be a few different reasons. Here are a few things you can try to troubleshoot the problem:

1. Check the manual: Consult the manual of your device to ensure that you are using the correct procedure to unlock the device.
2. Check the lock switch: Make sure that the lock switch on the side of the device is not engaged.
3. Change the batteries: If the batteries are low or dead, the device may not function properly. Try replacing the batteries with fresh ones.
4. Check the firmware: Make sure that the device's firmware is up to date.
5. Try a factory reset: Some devices have a factory reset option that can be accessed through the menu or by holding down certain buttons. This will erase all data on the device, but it may fix some software issues.
6. Contact Olympus customer support: If you have tried all the above steps and the device is still locked, it may be best to contact Olympus customer support for further assistance. They will be able to diagnose and fix the issue or tell you if a repair is needed.

It's important to keep in mind that the Olympus VN-5200PC is an older model device, which makes it harder to find replacement parts and professional repair services.

If your Olympus VN-6200PC digital voice recorder is not turning on, even when it's not plugged into a computer, there could be a few different reasons. Here are a few things you can try to troubleshoot the problem:

1. Check the batteries: Make sure that the batteries are inserted correctly and that they have enough power. If the batteries are low or dead, the device may not function properly. Try replacing the batteries with fresh ones.
2. Check the power switch: Make sure that the power switch is in the correct position and that it's not stuck.
3. Check the firmware: Make sure that the device's firmware is up to date.
4. Try a factory reset: Some devices have a factory reset option that can be accessed through the menu or by holding down certain buttons. This will erase all data on the device, but it may fix some software issues.
5. Check the charging port: Make sure that the charging port on the device is clean and free of debris.
6. Contact Olympus customer support: If you have tried all the above steps and the device is still not turning on, it may be best to contact Olympus customer support for further assistance. They will be able to diagnose and fix the issue or tell you if a repair is needed.

It's important to keep in mind that the Olympus VN-6200PC is an older model device, which makes it harder to find replacement parts and professional repair services.

Is the battery any good, test it.

The "Zoom Error" message that appears on your Olympus SZ-14 camera's screen when you turn it on, followed by the camera turning off immediately, could be caused by a problem with the camera's lens. Here are a few things you can try to troubleshoot the problem:

1. Turn off the camera and remove the battery and memory card. Then, wait for a few minutes before re-inserting them and turning the camera back on.
2. Try gently tapping the camera on a flat surface to try and realign the lens.
3. Check the lens for any dirt or debris that may be blocking the movement of the lens. Clean the lens with a soft, dry cloth.
4. Check the lens for any physical damage like dents or cracks.
5. Try using the camera without the zoom function to see if it still turns off.
6. Contact Olympus customer support: If you have tried all the above steps and the camera is still not working, it may be best to contact Olympus customer support for further assistance. They will be able to diagnose and fix the issue or tell you if a repair is needed.

It's important to keep in mind that the Olympus SZ-14 is an older model camera, which makes it harder to find replacement parts and professional repair services. If the camera is still under warranty, you may be able to get it repaired or replaced by the manufacturer.

I have searched but have not found a manual for an Olympus SZ-45 camera. If you have any other information to provide, use the Comment menu to add it to your question.

To transfer photos taken by an Olympus Camedia C-1000L camera to a computer, you can use the following method:

1. Connect the camera to the computer using a USB cable.
2. Turn on the camera and set it to the "PC" or "Computer" mode.
3. On your computer, a new drive or a pop-up window should appear, indicating that the camera has been recognized.
4. Open the drive or window and navigate to the folder where your photos are stored.
5. Select the photos you want to transfer and copy them to your computer by using drag and drop or "Copy" and "Paste" functions.

Alternatively, you can use the Olympus Camedia Master software that came with the camera to transfer photos. Once connected and the software is open, you will be able to see the camera's content, then you can select and transfer the photos to your computer. It's important to keep in mind that the Olympus Camedia C-1000L is an older model camera, which may not be compatible with the latest version of computer operating systems, so it's recommended to check the software and the operating system compatibility before transferring the photos.

I would: use manual mode and external light meter (if accessible) use tripod use iso 200 step down f-stop from wide open (but not more than f5.6) use 25mm lens (best quality lens you have) use remote trigger or self-timer use x-rite colorchecker passport (and calibrate software, like Adobe Lightroom) jope this helps!

Hi If you look in the camera menu under the CARD tab you will find the option to format the card. This will wipe the data from the card. We hope this helps.