Fuji FinePix 2800 Zoom Digital Camera - Answered Questions & Fixed issues
Memory card
did you connect the camera to the computer via teh cable supplied with the camers. this should resolve the problem.
8/9/2012 6:24:58 PM •
Fuji FinePix...
•
Answered
on Aug 09, 2012
•
86 views
Lens seems to be stuck
HelloThank you for using FIXYA!!!This
is a suggestion. If you do not feel comfortable trying it, you will need to take
the unit to your nearest service centre. Feel free to let me know if you
need any assistance.The problem might be that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the
probability is that you will have to get it fixed by a professional.Use
these at own risk as it may further damage the camera.Firstly ,
try connecting your ac adapter or usb cable.Try holding the
shutter button while switching on the camera.Look at the lens ,
and if some of the lens 'circles' is misaligned or not concentric then
try wiggling it (while holding camera lens down).Try gently
pushing or pulling the lens when it extends but this is risky as it may
cause the lens barrel to slip out of its guidance system.Another
way to do this is to place the camera lens down on a hard surface and
then power it up. Be sure to use a soft cloth or something similar as to
not scratch your lens or casing. Let the lens push the camera up and
down a few times and sometimes the little resistance provided by the
camera is enough to get things going again.Try hitting your
camera near the lens on the body with the soft tissue on the palm of
your hand.Other than that , I would take the camera to a repair centre for a evaluation to see if it would cost more to repair than to
replace the camera.If it is still under warranty I would suggest
you take it in before trying any of these steps and remove any
off-brand batteries or accessories as some stores are really fussy about
warranty repairs on camera's with non-brand accessories.You can also have a look at THIS link.Hope
the advise is useful. please do not hesitate to let me know if you need
any further assistance. Also, please be so kind to let me know if you
found this helpful.RegardsAndrea
10/10/2011 12:18:34 PM •
Fuji FinePix...
•
Answered
on Oct 10, 2011
•
111 views
When I plug in the
Its possible that you need reinstall your drivers camera or download from Fuji site some firmware update.
Keep us updated.
9/21/2011 12:54:09 PM •
Fuji FinePix...
•
Answered
on Sep 21, 2011
•
161 views
My Fuji finepix 2800z uses
Wow, these cameras work the best with rechargeable type batteries the Alkaline batteries will just die before you get 50 pictures. If you are using the LCD screen all the time it's a power hungry hog and will kill the best of batteries quickly.
You should program the camera to auto shut off in 2 minutes, review time should be about 1 minute and the camera should be in sleep mode or turned off between pictures to conserve as much power as possible.
I use a Fuji S100fs camera a lot for a walk about, documentary, time laps and generally shooting and can get about an hour of continues use from one battery and about 190 frames.
4/19/2011 5:38:59 PM •
Fuji FinePix...
•
Answered
on Apr 19, 2011
•
134 views
USB port appears not to be working
Consider NOT using the USB connection.
The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.
Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program, such as Picasa ( http://picasa.google.com ).
4/8/2011 12:33:11 AM •
Fuji FinePix...
•
Answered
on Apr 08, 2011
•
30 views
What are the steops to reset language?
Turn on the camera and press menu - ok to display the menu. Press the selector up or down to highlight SETUP. Press the selector right to display set up menu. Press the selector left or right
to choose the page with language setup, when you get to the language setup page, press DOWN
selector to enter the menu. Press the selector left, right, up or down to select a language. Press
Menu/OK to set. I hope this works for you. Good Luck.
1/24/2011 2:37:30 AM •
Fuji FinePix...
•
Answered
on Jan 24, 2011
•
80 views
In photo mode the camera
Hi there please follow the steps and let me know the result.
1. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.
2. Look carefully between the lens and the camera body for any sand, dirt or any damaged etc.
3. Try turning the camera with the lens facing down and shake to dislodge anything stuck
4. Try removing batteries and memory card, wait 5 minutes and refit the battery only.
5. Now turn on camera( with out card ) and see ,if working then fix the memory card & again turn on the camera. If working then fine .
Otherwise format the memory card and fix back in camera again & try. Make sure before format the memory card take a
back up all photos in your computer then format. If no luck then reset or restore the camera setting by pressing Menu key for 2 sec ..
in not done the press both Menu & self time key for 2 - 4 sec.
i hope it will gives you success.
1/18/2011 11:37:12 AM •
Fuji FinePix...
•
Answered
on Jan 18, 2011
•
132 views
Where can i buy smartmedia card here in the
Try buying through Ebay. If you are not a member, register as a member. It is free. Goto Ebay.com. You can pay through paypal. Ebay is very reliable.
I am not looking for money. Hope it helps.
1/3/2011 2:49:15 AM •
Fuji FinePix...
•
Answered
on Jan 03, 2011
•
107 views
What does zoom error mean
Hello
The problem is that the lens has become stuck in the barrel. There are some DIY solutions you could try, but the
probability is that you will have to get it fixed by a professional.
Use
these at own risk as it may further damage the camera.
Firstly ,
try connecting your ac adapter or usb cable.
Try holding the
shutter button while switching on the camera.
Look at the lens ,
and if some of the lens 'circles' is misaligned or not concentric then
try wiggling it (while holding camera lens down).
Try gently
pushing or pulling the lens when it extends but this is risky as it may
cause the lens barrel to slip out of its guidance system.
Another
way to do this is to place the camera lens down on a hard surface and
then power it up. Be sure to use a soft cloth or something similar as to
not scratch your lens or casing. Let the lens push the camera up and
down a few times and sometimes the little resistance provided by the
camera is enough to get things going again.
Try hitting your
camera near the lens on the body with the soft tissue on the palm of
your hand.
Other than that , I would take the camera to a repair
center for a evaluation to see if it would cost more to repair than to
replace the camera.
If it is still under warranty I would suggest
you take it in before trying any of these steps and remove any
off-brand batteries or accessories as some stores are really fussy about
warranty repairs on camera's with non-brand accessories.
You can also have a look at THIS link.
Hope
the advise is useful. please do not hesitate to let me know if you need
any further assistance. Also, please be so kind to let me know if you
found this helpful.
Regards
Andrea
11/9/2010 4:06:39 PM •
Fuji FinePix...
•
Answered
on Nov 09, 2010
•
48 views
Not finding what you are looking for?