20 Most Recent
Fuji FinePix F401 Digital Camera - Page 2 Questions & Answers
My finepix A800 is in japanese. I need it in english
Press MENU/OK to open the menu. Use the up/down-arrows to navigate to Setup (it should be the last item, marked SET) and press right-arrow. Use the right/left arrows to select Setup2 (the wrench with the digit 2) and press down-arrow. Use the up/down arrows to navigate to an entry marked with LANG and press right-arrow. Select "English" and press MENU/OK to confirm.
Samsung digital cam vp-d351
First try to take photo in a sunlight, if the photo is still hazy then clean the lense and make sure you dont put your finter anywhere in front of the camera.
If the photo is still hazy then it could in internal camera fault.
If the photo is fine in the sun but its blurry in the dark then take photo with flash if thats ok then you just need more lighting.
Also make sure the ISO Rating is auto or 100 many people set ISO to 800 and then forget about it. It causes hazy photos in the dark
Need f401 usb connectin software
Hi there
Connect the camera
Turn it on
Open (my) computer
Look for a hard drive which wasn’t there before
double click it
Inside there will be several folders
One of them has your pics in it
Copy and paste them to wherever you want
Hope this helps
Beergut707
No Picture
new battery
new smart card
all setting ok
Wont take pictures
A manufacturing fault- contact the Fuji support line for instruction to return the camera for replacement
Lens cover stays in between, won't open nor close
Had a similar problem once. Fixed it by opening the camera and freeing up the lens cover.
1)Undo 2 screws each side and the base (6 in all) ignore the one on the front edge of the base for now.
2)Separate the base from the case (gently!) don't pull them too far apart, because they're joined by ribbon cables.
3)Then remove the long screw you ignored above, and again carefully separate the front panel.from the body.
4) At this point, you should be able to access the back of the lens cover, and free up the mechanism.
Once that' s done, put it back together, reversing the above sequence. Don't force anything, just make sure they're all lined up and fit before inserting the screws.
good luck.
Not finding what you are looking for?