Sony KLV-S32A10 32 in. HD-Ready LCD Television - Answered Questions & Fixed issues


Go to settings and use anything other than wide option. Setting there - just look for it.

Sony KLV-S32A10... | Answered on Feb 21, 2016 | 188 views


0261,0266,0200. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes used for devices too are given, in the order of device brand name list in alphabetical order. Do a search by type in the brand name of your device, at its search box, and press "Enter". Or, pull up older posts.
http://remotesearch.blogspot.com/
http://electrohelponline.blogspot.com/

Sony KLV-S32A10... | Answered on Jul 22, 2014 | 64 views


Hello
Programmable code number for DVD/VCR [Sony] is _ 601 (Sony Dream System)
Programmable code for SAT/CABLE is _ 801 (Sony Satellite Receiver)
Above stated both codes are common for [SONY KLV-S19A10 _ KLV-S26A10 - KLV-S23A10 AND KLV-S32A10 compactable]. OK.

Sony KLV-S32A10... | Answered on Jul 20, 2014 | 1,232 views


Some TV's can be connected to the internet and are then able to get software updates from the manufacturer. Look into that as a possibility.

Sony KLV-S32A10... | Answered on Dec 21, 2013 | 65 views


Have a look here I have the same problem and have been looking for 3 days...I hope this helps as I have tried the service manual and the part number is...1-805-870-21...with no luck...http://www.invertercentral.com/qrySpecSheet.asp?page=srlp&name=LTA320W2-L02&number=LTA320W2-L02&title=Toshiba&Country=Australia

Sony KLV-S32A10... | Answered on Sep 13, 2013 | 901 views


Count the number of blinks occur at one time switch ON. These are fault indications, called blinking codes. If you wish to get more details, check this site. Pull up older posts there. Check the site with patience, as it has over 2200 posts now. All are related to electronic equipment repair help. Blinking codes to Sony TVs are described in detail.

Sony KLV-S32A10... | Answered on Apr 04, 2013 | 56 views


038,028,057,014 are the common setup codes for Sony television. If you want to get more details about setup codes and setup proceedings to different other brand remote controls, check this link. Look for codes to Sony. In most of the remote controls will have setup codes for Sony. Before selecting a remote control, check the digit number of code that your Sony Tv accepts. some of them accecpt 3-digits codes, others accept 4 digit, 5 digit and so on. You can get details to all by this site. Search it patiently.

Sony KLV-S32A10... | Answered on Feb 25, 2013 | 125 views


The Roku is the problem, not the TV. You need to go to the Roku site and request download information to synch the Roku to an HDMI input.

Sony KLV-S32A10... | Answered on Jan 13, 2013 | 4,852 views


You are discussing about the service mode setup procedure to this TV, I assumes. Check this to know more. Your TV model's service mode entry and other details are described in detail there.

Sony KLV-S32A10... | Answered on Jan 07, 2013 | 118 views


I hope that you have gotten this resolved, but if you have not, or if you have the problem again in the future, here are some simple steps for you!

1. Hold down the clear TV button until all lights light up at the top of the remote
2. Punch in a 3 digit code (provided below)
3. Press the # (POUND) button
4. Try powering the tv on/off, and the volume. If one or more of these functions do not work, start over from step 1 with a different code

500
837



Becki Barned
DISH Network Customer Service
becki.barned@dishnetwork.com

Sony KLV-S32A10... | Answered on Aug 11, 2011 | 99 views


You need to change out the caps on the video processing board,caps (smd) type have gone bad ,must replace the caps by exp. or qualified tech,must be able to unsolder and solder components ,make sure to clean board with some denatured alcohol ,board gets saturated by electrolyte that leaks out of the caps,common problem ,happens in all electronics,that or take it to the shop,caps look like little silver round cans

Sony KLV-S32A10... | Answered on Feb 04, 2011 | 36 views


High definition ready is different to Full High defintion for the simple reason the software is different to prove play a HD play station game on both and you will immediately see the difference in picture quality however the difference is not so significant on your normal satellite HD channels depending on the resolution the TV can produce

Sony KLV-S32A10... | Answered on Nov 23, 2010 | 127 views


That HDMI port hub it properly shorted,tries used another HMI ports hub?Tries to reset the tv back to factory setting,by unplug,replug it an hour later,go to the tv menu go to PICTURE,go down to reset.So the Tuner board reset itself back to the factory setting,all the HDMI ports hubs,should work now or that HDMI port hub is shorted,or the Tuner board it dead.

Sony KLV-S32A10... | Answered on Jun 11, 2010 | 397 views


Ur Main Tuner signal board is dead.Replaced this board will fix this problems.Tries websites Shopjimmy.com,Ebay.com to buy a refurbish Tuner signal board for the replacement.

Sony KLV-S32A10... | Answered on Mar 13, 2010 | 409 views


Hi I had the same problem with one of my TV's and I know this may sound daft, but mine was literally a signal problem, got a booster, re-tuned the DVB tuner, hey presto. You might not be so lucky, and may have an aerial issue, in which case, that's a job for the aerial chap, which incidentally I also had to have sorted.

Sony KLV-S32A10... | Answered on Dec 06, 2009 | 348 views


It's the B board.... (Logically speaking) !!!!!!!!!!!!

Sony KLV-S32A10... | Answered on Aug 28, 2009 | 490 views


If the Standby light is blinking at the front panel of the TV, it seems that there is an internal malfunction occurred in the TV.
I will forward a link to a page where you can get more information and troubleshooting steps for this issue.

http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C399467

Please perform the steps provided on the page. If the issue still persists then service of the TV is required.


Sony KLV-S32A10... | Answered on Jul 27, 2009 | 662 views


hi friend,,,,,,,
i think due to high voltage resistor in dma board has blasted,,,,,
did u see any burnt marks,,,,,,,,,reply me

thank u,,,,,,,,

Sony KLV-S32A10... | Answered on May 03, 2009 | 703 views


It sounds like the TV is in overscan mode, thus chopping off part of the screen. Check your manual to see how you can change this mode. The mode also might be in 'Zoom', thus chopping off part of your picture

Sony KLV-S32A10... | Answered on Feb 07, 2009 | 289 views

Not finding what you are looking for?
Sony KLV-S32A10 32 in. HD-Ready LCD Television Logo

69 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76204 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1691 Answers

Ekse

Level 3 Expert

13434 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...