20 Most Recent Sony FD Trinitron WEGA KV-36FS120 36" TV - Page 3 Questions & Answers

You can use a razor blade, to slide the stain out. Gopakumar Gopalan Google

If you wish to get some details; check the site linked here. Viewing it in "Mosaic" will make surf easy. http://electronicshelponline.blogspot.com/ Repair procedure, and troubleshooting to many popular brand TVs are given.

Check and replace damaged component/s at its main power supply regulator section circuit. If you wish to get some details, check the site linked here. Pull up older posts. Check the site in 'Mosaic' view. It will make search easy. http://electronicshelponline.blogspot.com/

It will take some time to get the picture tube; especially to Sony TV. You can get it by the authorized service centre only. Sony won't sell it by open electronic spare part market; the availability chance too is rare. google.com/+GopakumarGopalan

Try adjusting the screen control on the flyback.

The number you notice on the screen is the error code, by which you can understand the fault with the TV now. If you wish to get more details about this, check the site linked here. It has fault codes & blinking codes to many brand TVs. google.com/+GopakumarGopalan

The problem on that aspect is on the tv internal tuner section,on 33volts dc supply,,cause by the a shorted zener diode...,Dods

There are two Ic's that need replacing on the Deflection Board (D) board.. These regulate power for the High Voltage and Chopper PWM circuits. The IC location on the board are IC6501 and IC8002

Download the repair manual to this set. It has all details.

1. Place set on flat solid surface (garage floor or driveway).
2. Bang into it with SUV 3 or 4 times.
3. If set fails to respond, crush against garage wall or drive over it

if you dont see the chanel 3,find the it from the menu or settings then you must rechanel it for manual rechanel then add it on

speakers are dead or dont get energy

the speakers are dead, or just dont get energy.try to make sure that the provblem is not this.if it is you cannot fix it yourself, go to service with it.if not i cannot help

Como programar un control universal m solutions ms-rc202busco l codigo para panasonic.Gracias

I've uploaded it for you to a site:
http://data.hu/get/3342921/sony_kv-27fs320_32fs120_32fs320_34fs120_36fs120_36fs320_38fs120_chassis_ba-6_ET.pdf

I've also saved it to my computer, so if it's not working write me a message, and I'll send it to you via email too.

Hope I could help.

Gabor from Hungary

How many times do this standby light flashes at one time switch ON? Count it. These flashes are fault indications. From the number of flashes, you can get an idea about which section circuit inside it is faulty. After confirming it, If you wish to get more details of these blinking codes, check this link.

Check this link and download the user manual to your TV. Refer it. It have all details.

Hi, There is a TV/VIDEO button on frond panel of the tv. When you press each time this button then you will able to access different video inputs. if the button is inactive the probably the micro switch for TV/VIDEO button may be faulty. also check the same with the remote. If its doesn't help then try to reset the tv to factory default setting. For that you need the remote. Keep in mind that when you reset the tv to factory default setting all the memorized parameters will erased(like channel memory, personal preference setting etc ). For reseting the tv to factory default do the following1.Turn on the TV. 2.While holding down the RESET button on theremote control, press the POWER button on the TV front panel.The TV will turn itself off, then back on again. Release theRESET buttonAjin