20 Most Recent
Craftsman 3 gal. Air Compressor, 1 hp, Tank - Page 7 Questions & Answers
Lubricate
This is were you add oil to the hammer mechanism, to lube the motor just simply add it through the air inlet.
Wire 110 to 220
If you have a 110 volt appliance, all switches , wiring and components are made especially to handle that voltage. If you feed 220 to 240 volts into it, most certainly the machine will be unsafe and likely fail in a very short time. Purchase a step down transformer to reduce your supply voltage to 110. Most good electrical parts stores should be able to supply this.
Craftsman model #921166390 motor
The motor does not take oil on that unit. The compressor housing does though. If you cant get it to start after it ran dry, the cylinder is most likely seized to the piston.
Hi, a friend has a
If it will not shut down, that is an indication of a regulator problem or mal-adjustment. For best results, replace it. Craftsman/Sears should have the part.
Is this device 120 or 220?
If important, you can 'reply' to this post and that will return to my attention.
Thank you for using FixYa.com
Not finding what you are looking for?