20 Most Recent
Panasonic PT-50LC13 50" Rear Projection HDTV - Page 8 Questions & Answers
My Panasonic PT50LC13 will no
How old is this tv?<br />Did you replaced its lamp in last 2-3 years?<br />I think your tv needs lamp replacement.<br /><br />
8/17/2010 6:57:25 PM •
Panasonic...
•
Answered
on Aug 17, 2010
When I turn my unit
Hi,
Your power supply board is dead, u know basic electronics’ and soldering? Most of the times, the power supply board just have dead leakages gases capacitors.These capacitors always bulges up on it top,or puff up on it top.Replaced these gases leakages capacitors will get your TV power stable,and work again.Or tries websites like Shopjimmy.com,Ebay.com to buy a whole refurbish power supply board for the replacement.
Good luck in solving the problem
8/16/2010 10:38:31 PM •
Panasonic...
•
Answered
on Aug 16, 2010
Tv won't turn on
You need a new projector bulb. Google up your model and buy the best warranteed one you can find. Buy a "caged assembly" and not just a bare bulb.
Then unplug your tv and get a screwdriver. Follow your model's instructions and just snug down the electrical screws. Do not overtighten them.
Then consult your manual on how to reset the lamp timer so it knows you put a new bulb in and fires up from the first try.
Treat yourself because you've just saved yourself a trip from a repairman!!
8/13/2010 7:47:58 PM •
Panasonic...
•
Answered
on Aug 13, 2010
I have a panasonic projection TV and suddently the
Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.
Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question
8/13/2010 2:47:31 AM •
Panasonic...
•
Answered
on Aug 13, 2010
When TV is turned on, there is no picture but a
Yes,it will resolved ur tv picture issues.This tv the projection lamp has not been replaced at least 1 1/2 or 2 years right?The tv on an in used at 4 or 5 hours a day right? The projection lamp life span are over.Sometimes the Ballast board have to be replaced too.This Ballat board it to help to ignite the projection lamp.
7/15/2010 2:15:26 PM •
Panasonic...
•
Answered
on Jul 15, 2010
Turned t.v. on and worked
The blinking LED under the word LAMP is there to notify you that the bulb that is providing the light on your tv has died and must be replaced.
You can get one from here
http://www.amazon.com/Panasonic-PT-52LCX15-Lamp-MPN-TY-LA1000/dp/B0009TA728
The sound is generated by the power source, it's in protected mode - it has almost shutdown itself to protect itself against the overstress caused by the failed bulb.
7/6/2010 9:07:13 PM •
Panasonic...
•
Answered
on Jul 06, 2010
WERE exactly is the Lamp in my T.V ?
You must remove the plastic cover from the front and just left of center there is a panel covering the lamp with a single screw. Under that the lamp is also held in with a single screw. Pull on the handle firmly to remove lamp. Replace with TY-LA1000 bulb.
7/5/2010 11:22:10 PM •
Panasonic...
•
Answered
on Jul 05, 2010
Not finding what you are looking for?