20 Most Recent
Kenwood KDC-MP4028 CD Player - Page 9 Questions & Answers
Kenwood A58 amplifier spectrum issue
It sounds like your Kenwood A58 amplifier may be having a technical issue that could be caused by several factors, including an internal component failure, a wiring problem, or a software issue. Here are a few suggestions to help resolve the issue:
- Check the wiring: Make sure that all the wiring and connections to the amplifier are secure and properly connected.
- Power reset: Disconnect the power to the amplifier, wait a few minutes, and then reconnect it to see if the issue is resolved.
- Update software: If your amplifier has firmware or software updates available, it may be worth updating to see if the issue is resolved.
- Contact the manufacturer: If the above steps do not resolve the issue, it may be best to contact Kenwood's technical support for further assistance.
It's important to handle the amplifier carefully to avoid causing further damage or issues. If you are not familiar with the internal workings of an amplifier, it may be best to seek help from a professional for a repair.
Error code 99 Kenwood kdc-148
The manual simply says this is a malfunction and you are advised to press the reset button. If the error does not vanish the, you are advised by the manula to contact the service center.
I please need a kenwood
battery yellow
accessory red
ground black
power antenna blue
amp turn blue/white
illumination orange
dimmer orange/white
RF + gray
RF - gray/black
LF + white
LF - white/black
RR + violet
RR - violet/black
LR + green
LR - green/black
Kenwood je 600 shows it has power but won't operate
Hi,
Please clean your juicer thoroughly before attempting to power again. If this does not work, please switch the juicer to a different power outlet. If possible to factory reset the device, please attempt that if the power outlet was not the issue. Otherwise, you might work with a company like Home Depot or Geeksquad/Bestbuy.
Thank you.
Alpine TMX-R2000, how do I get the sound to play over the speakers?
Hi,
if this product instructions are not useful to help you install your device in the car and get the sound playing properly, I would recommend using a mobile mechanic to hook up the device and debug it for you as this will save you much time. But you can re-attempt the install based on the instructions once more as you might have accidentally skipped a step.
Thank you.
How do you set the screen right from backward on a kenwood DDX 814
Hi,
Please look for any rotate arrow or circle with an arrow on it's border. If you can't find this, please restart your infotainment system and check your screen again. If still having issues, please use page 101(to start) of your infotainment manual to troubleshoot the issue.
Thank you.
How can I fix Rxd-655 protect mode?
Check the speaker wires. Make sure that damaged/frayed wires aren't touching other wires or the case of the mini shelf system. If the protect message persists, then the short could be internal to the system. I know service manuals are available online for the Kenwood RXD-655. However, it may not be worth repairing the system.
I hope this helps.
Cindy Wells
I need the codes to my Kenwood stereo KDC BT 375u
please tell what CODE meansbluethoothor SiriusXM??or what? CODE DO YOU mean.page 8 , did you make it to page 8 , tell it your LANGUAGE>just buy it new. the radio or USEDor a used car just bought with this as old as 2018 radio.the radio must be setup first , per pages 8 on, this radio is smart, the display shows full errors is full language words. like, "UNSUPPORTED DEVICE"the only locks on this RADIO heat for SiriusXM optional TUNER, <<< got thisis the detached face plate clean on the back side ,gold pins/ or filthy. must be kept clean that.
Not finding what you are looking for?