Top 20
Kenwood KDC-MP4028 CD Player Questions & Answers
Cd error 99
Wasnt right format. Or wrong disc type. Dont remember really.
4/20/2014 2:19:43 AM •
Kenwood...
•
320 views • 0 helpful votes
Enter code
Speak to Kenwood and have proof of ownership as they may give you the code or send you to the local service agent to get it done
4/21/2014 2:14:51 AM •
Kenwood...
•
73 views • 0 helpful votes
Kenwood kdc mp235 security code
When you disconnect your battery and then reconnect it again, it disables the radio. This is an anti-theft protection for your car radio. The enable your radio the activation code is in your vehicle owner's manual. If you do not have this code you need to go to your vehicle manufacturer's service centre and get them to enter this code for you.
2/6/2013 6:38:35 AM •
Kenwood...
•
632 views • 0 helpful votes
Radio works but face plate shows nothing
You have two possibilities. You can try cleaning the contacts on the back of the radio and on the subpanel with qtips and rubbing alcohol or a pencil eraser. If that doesn't work, you may have bad solder connections on some surface mount resistors inside of the radio. If you are good at soldering they should be on the right front of the radio, you will have to remove the cd mechanism to get to them.
3/14/2012 7:18:30 PM •
Kenwood...
•
111 views • 0 helpful votes
Cd player will not play cd's. Error code: TOC
A few things it could be:
No disc has been loaded in the disc magazine.
CDs being used are burned, test using different media or an actual CD.
Very dirty or scratched CDs.
The CDs are upsidedown.
9/21/2011 2:39:10 PM •
Kenwood...
•
356 views • 1 helpful votes
Hello I have a kenwood kdc-x579 reciever I took
In order for you to get the security code you will have to contact Kenwood and pay a charge of £10. You will need a copy of the receipt OR your driving license, the model number and your name, address and contact number so you can be contacted for payment.
If you bought the stereo before 2009 use this page.
If you bought it during or after 2009 then use this one.
3/10/2011 9:11:06 PM •
Kenwood...
•
99 views • 1 helpful votes
I DISCONNECTED MY KENWOOD STEREO
You will need to visit an Authorized Dealer or service center for that product to get the unlock code reset. You can find a dealer listing on their website, or call them.
1/17/2011 1:37:47 AM •
Kenwood...
•
252 views • 0 helpful votes
Ho to remove stereo from holden barina 99?
Every stereo has side clips.
Have you done this first step?
After you pull it out and finally disconnect all the rear stereo cords from the audio system.
12/14/2010 9:13:53 PM •
Kenwood...
•
447 views • 1 helpful votes
Just got this car ,,
You can download the manual at
http://www.kenwoodusa.com/UserFiles/File/Global/Consumer/Manuals/KDCMP4028.pdf
9/20/2010 6:12:45 PM •
Kenwood...
•
132 views • 0 helpful votes
Not finding what you are looking for?