20 Most Recent Kenwood Excelon KAC-X521 Car Audio Amplifier - Page 4 Questions & Answers


http://www.tech-faq.com/how-to-reset-a-kenwood-security-code.html you can try this site and follow the instruction this may help u

Kenwood Car... | Answered on Jun 21, 2019


Hello Brian,
There is no reboot button on this unit. To reboot the receiver, simply unplug AC power for 30 minutes, then while plugging back in press and hold the power button for 5-10 seconds at the same time to reset.
Check all the speaker wiring for shorts, make sure they're also not touching the chassis of the receiver, or are not otherwise pinched or frayed. If all looks well, try disconnecting all the speakers and cycle the power off, then on again.
Try connecting the speakers one at a time until one of them shuts the Audio down. Check this speaker with a multi-meter and make sure it is reading between 4-8 ohms.
If not, the speaker may be blown and is causing the receiver to short out and therefore power the audio down.
If you still cannot get any audio through the system, then it likely has bad output transistors, or capacitor and is in need of service.
Here is a link to the Operating Manual Good Luck, JP https://www.manualslib.com/manual/286996/Kenwood-107vr.html

Kenwood Car... | Answered on Jun 16, 2019


Hello Francesco, I sent you the link to the service manual of your Kenwood XD-500, so that you follow the steps to get to the CD changer
I hope the information is usefull
Greetings Franco Dosil

Hola Francesco, te env?o el link del manual de servicio de tu Kenwood XD-500, para que sigas los pasos para llegar al cambiador de CD
espero te sirva la informacion
Saludos Franco Dosil

https://data2.manualslib.com/pdf3/73/7207/720696-kenwood/rdx500.pdf?d49de5368b8f22b833b01cd689435890&take=binary https://www.electronica-pt.com/esquema/audio/kenwood-audio/kenwood-rxd-500-3259
http://www.fixya.com/answer/answerpageslideview.aspx?ctg=mine&fml=0&brd=0&p=2&thid=27262670#

Kenwood Car... | Answered on Jun 15, 2019


dealer with vin or vehicle and proof of ownership

Kenwood Car... | Answered on Jun 13, 2019


Your Kenwood senses battery replacement as battery theft and forces you to re-enter the appropriate code to get back in operation.

Kenwood Car... | Answered on Jun 06, 2019


Actually serial number you can find on gadget body or on gadget papers.

Kenwood Car... | Answered on Jun 03, 2019


I need help on a 1999 Nissan maxima, I have the same radio

Kenwood Car... | Answered on May 26, 2019


This should be very easy. Kindly take a photo of the harness. Post here and I will help you. Or talk to me at ask@electronics.co.ke

Kenwood Car... | Answered on May 08, 2019


We do not have this firmware.

Kenwood Car... | Answered on May 08, 2019


Is the signal going to the Scosche from the factory HU or a factory amplifier. If from amplifier you will need something like the Audio Control LC-2i that can handle amplified inputs. You may have done damage to the input side of the amp or the LED circuits.

Kenwood Car... | Answered on Apr 28, 2019

Not finding what you are looking for?
Kenwood Excelon KAC-X521 Car Audio Amplifier Logo

19 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Car Audio & Video Experts

Marvin
Marvin

Level 3 Expert

85222 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

The Knight
The Knight

Level 3 Expert

76204 Answers

Are you a Kenwood Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenwood Car Audio & Video

  • Kenwood Car Audio & Video

Most Popular Question

kenwood excelon kac x811d blinking e 03

  • Car Audio & Video
Loading...