Top 20 Kenwood Excelon KAC-X521 Car Audio Amplifier - Page 7 Questions & Answers

http://manual.kenwood.com/files/B64-2114-00.pdf https://www.manualslib.com/products/Kenwood-Kdc-119-258508.html

posssiblitty the sofware need to be up dated

try unpluging the unit for about five minutes then try again

Hi Karen, you can download the manual from the internet to a USB memory and then print it or send it to print on the sheet size you like best and you would already have it on paper I send you the link to download Regards Franco Dosil Hola Karen, puedes descargar el manual de internet a una memoria USB y luego lo imprimes o lo mandas a imprimir en el tama?o de hoja que mas te guste y ya lo tendrias en papel te envio el link para que lo descargues Saludos Franco Dosil http://manual.kenwood.com/files/509335ef87853.pdf http://manual.kenwood.com/files/509335dbbeee5.pdf

https://www.manualslib.com/k/kenwood+mdv-313.html

Download the model number, then put operators manuel.

Hi Lisa, as you say, it is very likely that the Laser reader may be dirty or the reader's progress locked Consult a specialized technical service Regards Franco Dosil Hola Lisa, por lo que comentas, es muy provable que pueda estar el lector Laser sucio o trabado el avance del lector Consulta a un servicio tecnico especializado Saludos Franco Dosil

Andrew maybe model RC-R0607 - ask /check AT https://www.remote-control-world.eu/rc-for-home-theatre-kenwood-c-10_619/kenwood-rc-r0721-replacement-remote-control-p-5922

Kenwood has the manual for the KDC-U346 available through the Car Electronics support page: https://www.kenwood.com/cs/ce/ . Enter the model number and click the search button. Click on the link to your model's support and scroll down to find the manuals. The current link to the KDC-U346 manual in English is http://manual.kenwood.com/files/4acea67631aca.pdf . This manual covers several Kenwood models. I hope this helps. Cindy Wells

Hi Trey, i understand that you not a technician, what i do advise is to first get your head unit bench-tested, have all the output channels and currents checked thouroughly. If that doesnt sort the problem then try a different head unit as a process of isolation. If the problem still persists with a new head unit, then the problem is definitely with the points of connection from the head unit, OR you may have a weak battery. The amplifier will not bring on a miswire fault in the head unit. Cheers.

It will be in protect mode until the component failure(s) have been corrected.

https://www.manualslib.com/k/kenwood+sc114.html

According to the manual, the aux input for the mpv622 is an optional accessory. If it's installed, you select the aux input by pressing the [SRC] button. Select the AUX/AUX1 display. Then press the [DISP] button for two seconds. The selected input blinks. Press the ? or ? to change the input setting.

check all the wiring at te back the push and hold reset button for ten second and try power again

push and hold rest bull with a small pin and the unplug unit for ten second then try power up again

http://www.tech-faq.com/how-to-reset-a-kenwood-security-code.html you can try this site and follow the instruction this may help u

10A https://manual.kenwood.com/en_contents/attachDownload/83343 (see page 68)

Look for you answer here: https://www.manualslib.com/k/kenwood+kdc-mpv622.html

Hello Brian, There is no reboot button on this unit. To reboot the receiver, simply unplug AC power for 30 minutes, then while plugging back in press and hold the power button for 5-10 seconds at the same time to reset. Check all the speaker wiring for shorts, make sure they're also not touching the chassis of the receiver, or are not otherwise pinched or frayed. If all looks well, try disconnecting all the speakers and cycle the power off, then on again. Try connecting the speakers one at a time until one of them shuts the Audio down. Check this speaker with a multi-meter and make sure it is reading between 4-8 ohms. If not, the speaker may be blown and is causing the receiver to short out and therefore power the audio down. If you still cannot get any audio through the system, then it likely has bad output transistors, or capacitor and is in need of service. Here is a link to the Operating Manual Good Luck, JP https://www.manualslib.com/manual/286996/Kenwood-107vr.html

Go to manualslib.com and type in the model number and you will get a 100% free manual while online and also if liked you can purchase a copy for what ever price they may have for that product or you can print it all out for free to I do believe.. Hope this helped...