20 Most Recent
Cobra 29 LTD CB Radio - Page 4 Questions & Answers
-wilson antenna installation diagrams for, Wilson
I have a wilson 5000 mirror mount. I mount it on the drivers side mirror on the upper cross arm that goes to the mirror. It is mounted on this arm with a bracket and a so 239 connector so I can undo it if I have to ,leaving the antenna connected.I can change coax and not have to worry about undoing the antenna. Remember one thing. The antenna has to be checked for SWR.each time you move it to a different spot or to a different truck.
Cobra 29LTD Classic RX seems to go off frequency.
all functions of the radio are performed by the main IC 2816c . The frequency is controlled by this also and if it is blown you will loose your frequency and the problem that emits is in your statement.
Probleme realistic 451
when you use the PA function you have to hook up another speaker so that the sound comes out when you talk
Are there any modification to increase reception
the person is talking about a cobra 38wxst and you guys give him information on a cobra 25,but the information is solid as to what is said Check your SWR ,Make sure your squelch is open,check for dust on the knobs , and then take it to a tech and let him fix it because a receive alignment is more sensitive then a tx alignment.
Receives but does not transmit. It is a Cobra 29
There are a few different things that can cause this problem.
1: If it is a power microphone (a microphone that requires a battery).
Try replacing the battery.
2: Broken wires that go from the microphone to the plug that plugs into the radio.You can try gently taking the plug apart and inspecting the wires.
If only one has come loose, you can re solder it to the pin it came from. If more than one has come loose, find a wiring schematic for the radio that tells which wire goes to which pin and re solder appropriately.
3:Have the SWR's checked on the antenna. If the SWR's are to high and the radio has been being used in this fashion, it could have burned up the transmit finals in the radio. If this is the case, you will need to take it to a reputable radio repair facility to have fixed.
How do you tune and peak a cobra 29 ltd classic
i would highly suggest you take it to a cb shop to get a cb tuned and peaked. before you do that though, make sure you have a good antenna system. a good antenna will have a much greater effect on your cb than tuning and peaking. as far as output, who knows? it all depends on the skill of the person doing the tuning. be warned that any output over 4 watts is illegal and you could recieve hefty fines if caught with an illegal radio.
I dont think my talkback works on my cobra 29 ltd chrome. am i doing something wrong?
was it already installed or did you set it up ? If its a talk back that is an s.m.d. then it is usually controlled by the rf gain and the delta tune .Some will mount it to be controlled by the mic gain.Others try it out by attaching a resistor to the PA and external speaker plugs on the back of the radio. you may have to use a bigger resistor or even a smaller resistor to get it to work the way you want it to .
Installing city lite noise toy to cb radio
just buy a remote one that hooks to the antenna output and the antenna hooks to it. Save your radio. If you sold it and the person you sold it to didn't want a toy then you would have to remove it.this way you can remove the toy and use it on another radio,or sell it too.
Not finding what you are looking for?