Transcend (589307) Media - Answered Questions & Fixed issues

I had the same problem with Windows 10. Go to manufacture on your computer for SD card and reinstall the drivers..it should work fine..remember whenever dealing with Windows you may have to reinstall drivers...

hi there. this is what i have just found on the internet it might help you out but not sure. After plugging in the device. Go to device manager (In run type "devmgmt.msc") In Device manager go to "Universal serial bus controllers" It should list the storage devices that you have connected to your PC. Right click and then click "Uninstall. Remove the USB drive and restart your system. Try connecting the device again, I think this should solve the problem. for windows xp first you need to go to Device Manager by double-clicking on the System icon in Control Panel, choosing the Hardware tab, and clicking Device Manager. go to divice manager usb hub controler it will be at last of the list then right click on usb hub controler open it go to usb root hub right click & go to properties then go to device and click ok do it 4 to 5 time it will work 100% i have tried it and it worked Best of luck :) hi do one thing go to my computer right device manager ther u to o universal serial bus right click on tht option go to update driver select yes this time only give automatic k . before doing this step plz insert mother board driver cd after tht u do all this procedure thn c ur pendriv vl be dedected k if none of the above works try this link out. Kingston DT 1000 pendrive was not detected in computer Google Search

Do not use any more and get some data recovery freeware.

All your data will be erased & used space of your pen drive will restore to 0 bytes.

Try formatting the card and be sure the locking switch is in the off position.

my pen drive Please insert a disk into drive problem

if u still having the same problem, follow these steps:

1.Insert your pendrive. open mycomputer, note the respective drive showing pendrive.

2. Then go to run and type cmd ( or go to command prompt)

3.It will show like: C:\> or C:\Documents and Settings\UserName>

4.Type the drive name of pendrive as shown in e.g
if drive is h: then type as

c:\>h:
h:\>format h:
it will format and ask for media name, you can give the name of your pendrive.

your pen drive is formatted. Now it will show the free space as 8G.B

Hi,
You can try to format the mp3 player.
Go through: Setting>Control Panel>Administrative Tools>Computer Management>Disk management>
Try to format it with fat files system.
hope this help you
Regards
uttam

kya baat hai.........

my transcend pen drive is not showing or hidden

Hello there yogeshpat876.

Here's your geek-steer ...

Is this a new drive? If so, it probably just needs to be formatted [and optionally assigned to whatever free drive (letter) you desire]:

Start > Run... > tpye "diskmgmt.msc" (without quotes), then OK

Good luck, and please do post back ...

• to let me (and interested others) know how things worked out,
• to provide clarification or feedback,
• if you have ANY further questions.

Today's the best day of my life ... and NOW you're part of it!
Via-con-Dios and Godspeed -- Geekinator (aka Craig).

see if you can format it if not it is bad

1. Download this tool:
http://dl.dropbox.com/u/4040651/LLFTOOL.EXE

2. Format

(WARNING: After running this low level format tool,
the whole USB flash disk surface will be fully erased.
Therefore, data restoration will be impossible after using this utility!)

Try this,
1.
Check out if the USB drive has a small swich for write protection. If its there try toggling the switch.

2.
Windows can all write protect flash drives. Check out this registry path,

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\StorageDevicePolicies.

You may find a key here on the right side by the name 'WriteProtect'. If it's not there this would not be the cause of problem. If it's there, make sure that the value is 0.

Please let me know if this does'nt work.

Your pendrive is infected with Autorun.inf virus
to remove this virus install malwarebytes (It is antimalware software)and scan your whole computer as well as your pendrive when you scaning finish remove all threats

IF the above method is not work

Try to format in other operating system like windows vista or in windows 7 because in vista and 7 you can force format your pendrive

Think this write protection error is due to some virus.
Steps to remove write protection for Transcend users
1) Go to download center of the transcend,here is the link
http://www.transcendusa.com/Support/DLCenter
Type the model no. or part of model number you are looking for.
example: JFV30(all alphabets in Caps )
2) Choose other details like product type etc. and search for your product
3)Then select the product which which is most similar to yours from search results
4)Then download the mFormat utility. You will asked for serial no. if you dont have..enter this no. 1456784523
5) Connect your pen drive
6)run the mformat utility and select full format after full format yourwrite protection will be removed. try twice or thrice if you can'tcorrect at first time.
Thats all...

It worked for me and my friends....

SD cards have a slide switch along one edge. The position farthest from the metal contacts locks the card, protecting it from writes. The position nearest the contacts unlocks the card.

it means that the memory card's sector is damaged by a virus infection...try to delete the files while in the mobile and then format it..if it agains appear the same then you've to buy a new card only`

Are any of your devices (TV, PC) Apple ? I\'ll assume not, and describe the procedure for Windows (XP)First, has the pen drive any files on it (for example film clips which can watch on your TV ? Are these valuable (you do not wish to lose) ? If the answer is \'no\', then you can try these two steps (for windows XP):Your pen drive works in your TV, but not in your computer. This suggests that maybe it is conflict of formats used by your TV and your computer. Consult your TV user guide to find which formats it is able to use. If your computer is a windows computer, it will most likely need disks (pen drives) formatted as FAT32 or NTFS. If eiher of these are mentioned in TV \'s user guide, that is good. 1. Left click on the windows start button at the bottom left of screen (a kind of flag symbol). Right click on \'My Computer\' or \'Computer\'. A drop-down menu will appear, from which you should select \'Manage\' by left clicking. A new window will open: some in this window will be an icon with the words DiskManagement by it. Double click or single, can\'t remember and yet another window will open, with information about all your disks, including your memory stick. Somewhere on this screen against that disk (which might be reported as \'Disk 1\' in the lower box) it should give the format. This should be either FAT32 or NTFS. It may be RAW or not recognized. If it says exFAT I fear there is no easy way to proceed, and you stop. (this might be a problem if your PC is running Windows XP, but not if it uses Windows 7 or 8). In any case you can right click in lower right box against the pen drive entry (NOT YOUR SYSTEM DISK !!) which bring up a drop down menu which should contain an option for formatting. Formatting will ERASE ALL DATA ON THE DRIVE BEING FORMATTED so choose the correct one. If given the option you should choose FAT32 and Full format (not quick format). Leave all the settings as default values, and proceed. This mat not work, in which case ....shut the DiskManagement Window etc. and2. Click on the Start button again, and select All Programs, and from that Accessories, and from that command prompt (the symbol being a small black square). A new window with a black background will open with an ">" prompt . You will have remembered the letter assigned to the pen drive, from either the Windows file explorer of DiskManagement. Type "FORMAT XXX: /fs:FAT32" and press return: the disk will be formatted. XXX is the letter assigned to the pen drive, which might be G or H for example. Ensure you get the correct one, if you are unsure do not proceed. Formatting a disk will result in all data on that disk (including a pen drive, and a harddisk) being lost. If successful this may take some time. Even if unsuccessful, it may take some time. In the latter case, I may have further suggestions to help. Please report back.11.June.2014

Put a piece of tape over the disk so it covers the holes on both sides. This would be the small rectangular hole where the tab is broken. Use thin tape (like Scotch brand) and wrap on both sides and you should be OK. The disk should be readable either way though as the tab makes the disk read-only.