Top 20 Teac (DV-W58GA-PUK) Burner Questions & Answers

Your request is simply unclear. I don't have a clue what your wanting or what your problem is. "I nee the cam plaese" doesn't make any sense.

The default SIM PIN code on TracFones is 0000, but the SIM PIN prompt is not enabled by default. It is possible to change the code and activate the feature through the menu. If you forget the code and enter the wrong code too many times, TracFone blocks the SIM card. If you need further help, I’m available over the phone at https://www.6ya.com/expert/chad_70dccdc9090b1a75

Is there a question here ? If you need further help, I’m available over the phone at https://www.6ya.com/expert/chad_70dccdc9090b1a75

i forget my puk num my number is 07036936840

Hello, you have to contact the customer service of your network provider and they will unblock/fix the problem for you. They are in d best position to fix this problem.

Good luck.

Hi
you can ask your puk no. from your service provider call to your costumer care and ask for your puk no and they provide you puk no for free....

thanks for using fixya

I LOST MY SIM PACK AM MY NUMBER IS 08038287983

These directions are for an AT and T phone, but other than that, are the same for any carrier. A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your phone carrier to unlock your SIM card. You can obtain your phone's PUK code from your carrier in one of these ways: Log in to Your account.online Use a Technical Support Chat Contact your carriers Customer Care Get Your Phone's PUK Code Online Go to the Phone/Device page. From the My Phone/Device screen, select the Unblock SIM Card link under the My Make & Model heading. The Unblock SIM screen will display your PUK code and will give you instructions for unblocking your SIM Card. Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code. Note: If you enter the wrong PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator

These directions are for an AT and T phone, but other than that would be the same for any carrier.

A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your phone carrier to unlock your SIM card.

You can obtain your phone's PUK code from your carrier in one of these ways:

Log in to Your account.online

Use a Technical Support Chat

Contact your carriers Customer Care

Get Your Phone's PUK Code Online

Go to the Phone/Device page.

From the My Phone/Device screen, select the Unblock SIM Card link under the My Make & Model heading.

The Unblock SIM screen will display your PUK code and will give you instructions for unblocking your SIM Card.

Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code.

Note: If you enter the wrong PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator

What is your mobile model??? if you want unlock code for your mobile try unlock-free to get code to unlock your mobile instantly..

there are basically 2 ways to retrieve your MTN PUK code. The first is by checking your sim pack it is usually a 10 digit number on your sim pack and can be found under your pin code. If you dont have the pack again simply use another MTN line to call customer care and request for it. The network provider will supply it to you.
Hope this solution has been helpful?
Thank you for visiting FixYa.

Hi, this is a common problem, the PUK code is the security code for the sim card and not the phone so you have a few options open to you,.
1. if you still have the pack the sim card came with then this will have the PUK code written on it
2. if you no longer have this pack then you can get your PUK code for free over the fone from your service provider, so say your sim card is with vodafone then all you need to do is giv them a call and they will give you the PUK code over the fone for free,
3. if you have a shop by you that is the same provider as your sim card like say orange or vodafone then take your fone into them and they can give you the PUK code over the counter for free.
4, if you no longer need to use that sim card then you can go out and buy a new sim and this will come wiv its own PUK code.

NEVER TRY GUESSING THE CODE AS ITS BETWEEN 10 AND 12 NUMBERS LONG AND IS TOTALLY RANDOM AND EACH PUK CODE IS UNIQUE TO THE SIM THATS ASKING FOR THE CODE,
NEVER PAY ANYONE TO GET YOU OR GIVE YOU THE PUK CODE AS ITS FREE TO GET AND THE PUK CODE BELONGS TO YOU SO ALL YOU NEED TO DO IS CONTACT THE SERVICE PROVIDER THE SIM CARD IS WITH AND THEY WILL GIVE YOU THE CODE FOR FREE OVER THE PHONE.

If you have any problems give me a shout back and let me know what network the sim is with and ill ill advise you on the best way of getting the code, sum service providers have an option on their website where you enter your details and phone number and it lets you get the PUK code that way,

let me know how you get on or if you need further assistance ok.
thanks........

For details to obtain the PUK code for the SIM card, pleaseclick on this link and follow my instructions.
http://www.fixya.com/support/r5705889-puk_code

Unfortunately this can be a difficult question to answer because of the amount of potential reasons for this issue to occur

Verify you have the latest drivers installed for the CD-R or recordable drive. There are numerous driver related issues that may cause a CD-R drive or other recordable to stop reading a CD-R disc. If you are running Microsoft Windows verify your drive is properly detected and listed in Device Manage with no conflicts or errors.

If Windows Device Manager detects an error on the drive or if it has other drives listed in Device Manager with errors on them remove the device from Device Manager and reboot the computer to let Windows re-initialize the drive.

If Windows shows no errors, the above steps did not resolve the issue, or you are running a different operating system check with the drive manufacturer for updated drivers.

click start control panel administrive tools computer management device manager scroll to cd/dvd rom drives right click properties then properties again then tick enable cd digital cd audio for this cd rom device or scroll to dvd regions select the no _ for your specific area make sure that the dvd burner is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or the drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd drive restart your computer then plug them back in this should activate the found new hardware wizard or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device Click start control panel administrative tools computer management device manager scroll down cd-dvd rom drives you might see a yellow question mark ? right click you will have options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall if this does not fix the problem it might be a registry problem if you cant see your disk drive in windows explorer Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak

If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.hope this helps

Hello

Thank you for using Fixya!!

The PUK code requested is an unique code to each phone. At the link below you will be directed to a tip i wrote on how to recover your PUK code.

Click HERE to navigate.

Kind regards
Lock123

A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your service provider
Fix:
Call your customer care and tell your mobile number and sim number. they will provide you PUK number.

what sort of problems are you having with your teac dvd burner?

Click start control panel,administrive tools,computer management,device manager scroll to cd/dvd rom drives right click properties then properties again then tick enable cd digital cd audio for this cd rom device or scroll to dvd regions select the no _ for your specific area If this does not fix the problem you might try you might have to physically unplug the leads for this cd-rom then plug them back in this should activate the found new hardware wizard or you might have to uninstall then reinstall your DVD/CD or uninstall the driver then reinstall for this device click start control panel admistrive tools,computer management,device manager scroll down cd dvd rom drives right click you will see options to update driver,roll back driver,or select properties general troubleshoot, select driver click to reinstall drivers click update driver or uninstall then reinstall make sure that the cd-dvd burner is getting enough power test all leads that are attached to the dvd drive including electrical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or if this does not fix the problem it might be a registry problem Close all open programs

Click on Start, Run, and type regedit and press Enter Click on the plus signs (+) next to the following folders

HKEY_LOCAL_MACHINE

SYSTEM

CurrentControlSet

Control

Class

{4D36E965-E325-11CE-BFC1-08002BE10318}

This folder is the DVD/CD-ROM Drive Class Description in the registry. Look for any of the following names in the right hand column.

Upper Filters

Lower Filters

Upper Filters.bak

Lower Filters.bak If any of the above keys shown in step 4 are listed, right-click on them and choose DeleteAfter deleting the keys, close the registry editorReboot your computerOpen My Computer and check to see if your CD or DVD drives have returned. You may also want to open Device Manager and verify that the yellow exclamation and error code on the CD or DVD drive is gone.hope this helps you

if you are referring to a mobile phone

Instant unlock code $1.79

www.wirelessunlocking.com

unlock any phone any network instantly paypal verified

or

Instant unlock code $1.99

www.mobileunlockstore.com

Unlock any phone instantly online use any network paypal verified

Hope this helps

you will have to contact the phone provider with your details and supply proof of your ID eg:passport or motor car licence or registration no if this is what you mean by breaking the security code

hope this helps

PUK stands for Personal Unblocking Key. This is a uniqueeight-digit code specific to your SIM card. This is required when the PINnumber to unlock your mobile phone is entered incorrectly 3 times. You are thengiven 10 attempts to enter your PUK code. If an incorrect PUK code is enteredafter the 10th attempt, you will block your SIM card permanently and willrequire a new SIM card from your mobile phone provider.
PUK codes can be obtained through the following ways - The PUK code is in your SIM card documentation Starter Pack.If you do not have this then -Please contact your phone service provider.
Your cell phone service provider can give you the PUK code once you give themyour account details and they have confirmed your identity.

my problem is I have been blocked from share and sell