i think your drive is either disabled or not configured properly go to the properties of my computer and then hardware then device manager then enable it if the device is enable then you check the driver settings and update your driver
I have just fixed a computer with a similar problem. The owner installed a new DVD burner (a SATA drive) and every time he inserted a CD or DVD disc, the computer shutdown (mostly, because the front LED was still on and the CPU fan too, everything else just turned off [drives, PCI cards]). It happened in Windows, in Linux (Ubuntu) and even in the BIOS screen, so I discarded an OS problem. Also happened while booting if a CD or DVD was already inserted in the unit; as soon as the drive LED blinked, the computer crashed. After checking the obvious, I did three final tests:
1) try the DVD unit in another computer (it worked); 2) try the DVD unit with the power connector only, with the data cable disconnected (it shutdown); 3) try the DVD unit with the power connector from and external power supply, with the data cable connected (it worked).
By this point, it was obviously a power supply problem. I checked the power supply unit (PSU) and discovered it was pretty small (250 W). So I installed a more powerful one (350 W) and then it worked.
I checked with a wattmeter and it seems this DVD drive increased the power consumption by 25 watts when started to spin the disc. I really don't know if that is normal (taking 25W to start spinning the disc) or if this drive has some defect, but it seems the previous PSU could not provide that extra power and shutdown some of its output (but not all).
So, if you have this weird problem, maybe checking the power supply and testing with a bigger one may help.
due to dusty environment it happens the lens gets dusty and then reading and writing problems occur the only solution is
pls buy a lens cleaning cd which have brushes installed on the surface and try to clean the lens this will solve , bcoz ur dvd was not wirtten properly it might not read ur that dvd but sure will help stopping this error again pls try to read that dvd after this cleaning and then also try to write some data to a new dvd and then read ur problem will be gone i hope
Hi,
you have a very sought after dvd player there.
people are paying a lot of money for these.
They Only support DVD- Disks. DVD-R/RW DVD-ROM. DVD- Video. If you are trying to Read Any DVD+ Formats, they,re not compatable with this Drive.
Hope this answers your problem.
Mike @ compurepair.
p.s recommend A Pioneer 111-112 Drive, reads most formats.
your DVD ROM's lens has became weak. and it cannot be repaired. But
if you manage to open the DVD ROM clean the dust in it & it will
start working agaain but be careful remember that no power should be
attached to ROM. pls rate me thankyou
you changed the dvd from one machine to the other? well, then you'll need to download drivers for that other computer, for the dvd that moved..this is a usual situation. Now, unless we know the computer make and operating system of the second computer, it's not simple to find the driver location(which is most likely on the computer makers website)
This sounds like your jumper setting is not right on the drive. If you have 2 DVD drives installed, make sure 1 is set at master and the other is set at slave.
hi ruthgirl
plz disable system restor and do a full virus scan by updating your anti-viruses in safe mode.
Then reinstall the burning software.
Plz feel free to write about your findings
Full 'make model (what it is)' in all questions please, first 3 words.
Capacitors can split or bulge, resistors can burn,, the transformer can fail internally..
Take it for repair unless you have the thousands of dollars of test equipment and have do the 2 year electronic course.
A communication error has occurred between the outdoor and indoor units. Faulty wiring or a malfunctioning control unit may be responsible. Contact LG customer service for assistance. Their number is 1 800 243 0000.
You will need to connect a single HDMI cable from your sound bar to the HDMI ARC or the HDMI eARC port on the Roku T.Make sure that both of the devices are both turned on.When your TV detects the sound bar,it will then automatically initiate the setting up process. Lastly follow the easy on screen instructions to finish setting up the connection.
