20 Most Recent
Brother DCPJ125 All-In-One Inkjet Printer - Page 8 Questions & Answers
Unable to Init. A7
The scanner type mounted doesn't match the eeprom data. Refer to qualified technician at Brother service centre for checking
Brother dcp-j125 shows unable to print 73
'unable to print 73' is a Printhead error..
Usually the printhead is an expensive part around $80 to $110, and you will need a full set of cartridges to prime the new printhead..
Sorry to say that this repair is not normally economical to go ahead with.
I see double lines when printing
A picture of the printout is required to confirm, nevertheless, it could be toner. Printing does not use scanner, so it has nothing to do with the scanner.
Ghost writing on my Brother DCP-7030 all in one printer
Ghosting on machines can be one of several causes.
- Poor Quality/ Damp toner - Replace the toner cartridge
- Worn Drum Unit - Replace the Drum Unit
- Fuser Unit Failing - Replace the Fuser Unit (Normally more than the printer is worth).
- Damp Paper - Open a new ream of paper and try printing again (This is the cheapest option to start with diagnosis).
Fault finding
Magenta Print-head may be blocked.
Depending on the model of machine.
Either on the Menu on the printer find Ink Management or press the Ink Management button.
Print a Test Page
If no Magenta Dots showing then proceed to Cleaning and Clean the print-heads through the proceedures given on the machine.
Print another test page. If Magenta Dots are fine then cleaning done. if not then try cleaning again.
If still not fine then the machine will need to be cleaned professionally which will cost a reasonable amount. Most service fees are more that it is to replace the printer.
Torner ended in brother dcp1511
This machine uses a Reset Gear to instruct the printer it has a new cartridge. The Starter Cartridge that comes with the machine does not have this gear attached to it so refilling the cartridge without installing and resetting the gear will not allow you to print normally.
If you are using a store bought cartridge that you have since refilled you can reset the gear to tell the printer it is a new cartridge.
I lost the CD HELP ME TO GET ONE
Go to the Brother Website for your region. Find the Downloads section.
Put in the details of your machine and search for the appropriate downloads for your machine.
Download the Drivers, Manual etc from there. Some of the regions may even offer to sell you a CD with all the downloads on it. But just download what you need.
Accidentally turned off computer printer now not working..
windows make loads of hardware errors, if it is not being picked up by the computer but the printer is turning on check it has not been installed as with the same name but a number after, if so select that for printing if not try plugging the usb lead from the printer in to a different socket on the PC.
hope that helps
ma
Not finding what you are looking for?