20 Most Recent
Kyocera FS3140MFP AllInOne Laser Printer - Page 3 Questions & Answers
How do i remove error 4200-0099296
As an error, the C-4200, refers to laser unit. Sometimes the main charge (mc) cause this error. Remove the mc and check the sound of the laser. If you don' t hear the laser sound, then the problem is the laser unit
Cleaning waste box in toner
I don't recommend cleaning a waste toner bottle but if you do just pull it out and empty the toner out its very messy for don't wear anything you don't want to get dirty
CODE ERROR C7990
This service code means that the waste toner reservoir inside the drum unit is full and that the printer has printed over 100.000 pages.
Drum reset procedure kyocera 1300
Unfortunately, you cannot reset the page counter on any kyocera printer. Unless you have an eeprom reader with the appropriate software.
Fs-3140 maintenance reset
When you are in ready state, type 10871087 to enter the maintenance mode. Then type 251 to go in the section where clean the MK counter. (U251 Checking/clearing the maintenance count). Press Start to reset (if I remember correctly , you will need to type a new counter (000000), not just to clear the old one). After reset, you press Stop key to exit the submenu. Type 001 and press Start to exit the Maintenance mode.
FS-3900DN rear unit paper jam
Hello, Power down the unit.Unplug power from wall. Power back up, if the error still happens, there is a small piece of paper somewhere, take toner out and look, or pull down back cover and look in there.
Erreur c3100
error c3100 is a scanner problem, try cleaning and lightly oiling
scanner rails, if this does not help may be scanner motor or pcb.
also check if scanner shipping lock is pushed on
Not finding what you are looking for?