20 Most Recent
GE Networx NX4 Security System - Page 9 Questions & Answers
What are the types of tracking devices?
GPS tracking system for vehicles can be of two types, depending on whether you need the vehicle position in real-time, or do you need the vehicle tracking data after the vehicle has travelled. Based on the requirements, there are two types of vehicle tracking that are available. They are:-
Active: The active GPS vehicle tracking devices are used to transfer the positioning data real-time to a close range wireless network device, like a phone with a Bluetooth.
Passive: Passive GPS vehicle tracking devices do not transfer the data real-time, but stores them for later use.
Article Source :
Executive safe CS-2 beep all the time with ready led switched ON
Question moved for Cars and Trucks Category.
Beeps are always low battery power. It is still under warranty so contact them direct. I did find this though for another make.
My electronic lock is continuously beeping, or makes 2 beeps when I try to enter the code what is wrong with my safe?
The lock is in lock out. Lock out is a security feature that is activated when an incorrect code is entered multiple times. To resolve the issue do not remove the batteries, walk away from the safe and do not push any buttons for 20 minutes. After 20 minutes, if you know the code you can key it in to the lock and open the safe. If you do not know it, you will need to
contact us to obtain the over ride code. You are welcome to call our office if you have any questions about your Gardall products.
MODEL CS-2, Security Safe with Electronic Combination Lock
- Solid Steel Pry Resistant Door and Body.
- Concealed Hinges For Extra Security.
- Two Live Locking Bolts.
- Electronic Combination Lock.
- Three to Eight Digit Programmable Combination.
- Three to Eight Digit Programmable Master Code.
- Auto Lock Mode for Added Security.
More items...
CS-2 Security Safe ' ExecutiveSafes
How do I lock an Amsec DL4000 safe when the door bolts won't move?
Question edited for clarity.
Question moved to home Security - Safes.
You can't. You have to open the safe with the Emergency Key, the combination Dial or in your case with the Electronic Keypad.
STEP 2 - CHANGING THE USER CODE
1-Open the safe by following step 1.
2-Press the Green set up button (Located on the
back cover or the hinge side of the back door
cover), the LCD display will turn Blue.
3-Enter your new user code (1-8 digits).
4-Press the # key.
5-The LCD display will turn Blue and show IN.
6-The LCD display will briefly show your new code.
7-Your new user code is now set to open the safe
NOTE: It is highly recommended to leave the
safe door open and practice your new code
several times before closing the door.
Manual
https://www.manualslib.com/manual/1800698/Amsec-Dl4000.html#manual
..
Not finding what you are looking for?